Hi
This afternoon I started my yb engine for the very first time and noticed that the oil pressure gauge on 6 dial dash goes off the scale-way too high. I thought I better check gauge so I put my compressor outlet through regulator and set it at 50psi and the gauge went up to half way which I think is fine
So my engine is definetly producing too much oil pressure BUT the big question is why?
Its has been rebored and all bearings in perfect shape, and it has one of them high pressure oil pumps (which came with engine when I bought it-it looked brand new and never used)
Needle was off the gauge on tickover, I didn't even rev it up at all!
Any ideas to what could cause this?
Bookmarks