User Tag List

+ Reply to Thread
Results 1 to 6 of 6

Thread: Anyone had it runnimg on standard injection system???

  1. #1
    Mechanic azz259's Avatar

    My 1st Project
    Join Date
    Aug 2009
    Location
    west wales
    Age
    32
    Posts
    503
    Thanks
    10
    Thanked 8 Times in 8 Posts

    Anyone had it runnimg on standard injection system???

    ill be doing this conversion soon but have to keep the standard fuel system, the xe i have now needs 5 wires connected to fire up,
    ive got a feeling this will need more, anyone done this before?

  2. #2
    I support TS Decade Plus User
    Turbosport Subscriber
    wildo105e's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    Oct 2006
    Location
    Manchester
    Age
    49
    Posts
    2,751
    Thanks
    95
    Thanked 164 Times in 162 Posts

    Re: Anyone had it runnimg on standard injection system???

    Not done this but i suspect you will need the ecu, the matching key, ignition barrel to overcome the immobiliser etc you may even need the dash etc. If you do this get a complete car then you will have the loom etc and all those niggly bits that will cost a fortune once you have realised you need them. Another way is keep the hardware i.e. sensors plenum etc and integrate this to an after market ecu i am sure some specialist must have a Plug and play solution to this by now. which will probally plug in to the loom and be mapped pretty close.

  3. #3
    Spanner Monkey

    Join Date
    Dec 2008
    Location
    scotland
    Posts
    298
    Thanks
    0
    Thanked 14 Times in 14 Posts

    Re: Anyone had it runnimg on standard injection system???

    search yukspeed and ask him.
    track fiesta on all the right bits.....

  4. #4
    World Champion caprimentle's Avatar

    My 1st Project
    Join Date
    Nov 2009
    Location
    essex
    Posts
    7,020
    Thanks
    355
    Thanked 247 Times in 237 Posts

    Re: Anyone had it runnimg on standard injection system???

    i've heard most people run them on the standard ecu and wiring loom as they found that was basically the best map for it and the easiest as most aftermarket ecu's don't like the Japanese sensors.
    Last edited by caprimentle; 26-11-2011 at 18:45.
    its not dead till it's buried!


    T.I.T engineering. "Feel the power!"

  5. #5
    Mechanic azz259's Avatar

    My 1st Project
    Join Date
    Aug 2009
    Location
    west wales
    Age
    32
    Posts
    503
    Thanks
    10
    Thanked 8 Times in 8 Posts
    Ive decided to stick with the xe for now, its a simpler option and just want to get the escort back on the road asap

  6. #6
    Bodger

    Join Date
    Apr 2003
    Location
    Essex
    Age
    51
    Posts
    137
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: Anyone had it runnimg on standard injection system???

    You need the key and it's sensor - you dont need the dash. Mines running (albeit with other issues).
    Rich B
    (I wish I was)

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts