Does anyone have any spare bolts for mating a type9 gearbox to xflow bell housing they can give or sell me?...Ive lost 4 ......i swear i have a poltergiest in my garage.
Does anyone have any spare bolts for mating a type9 gearbox to xflow bell housing they can give or sell me?...Ive lost 4 ......i swear i have a poltergiest in my garage.
M12 x 1.5 x 30 I think is the right size, don't beleive they are anything special
Ah ...cheers
Pretty sure they're M10 not M12.Originally Posted by wildo105e
M12 bellhousing to gearbox and M10 flange bolts onto the block.
if they are metric flange bolts https://www.ebay.co.uk/itm/Ford-Pint...gAAOSw15Zbr-62
but early xf 4 speed may be unc ??
Last edited by alladdin; 10-01-2020 at 22:58.
Some of those flange bolts avertised on fleebay don't look long enough to go through the lugs on the back of the engine block. There are boxes of assorted lengths available or even the proper Ford ones advertised.
The ones I have linked to are correct 30mm length. They are serrated flange so no spring washer needed.
Sent from my iPhone using Tapatalk
30mm bolts aren't long enough to bolt through the back of the block into the bellhousing, they are okay for the top two that screw into the block and the starter bolts. Flange bolts don't require spring washers.
Posting Permissions
Reply With Quote
Bookmarks