Looking for rough guide to what bhp I would achieve with v6 pistons 205 block with twin 45s?
possibly stage 3 head
tia
adam
Looking for rough guide to what bhp I would achieve with v6 pistons 205 block with twin 45s?
possibly stage 3 head
tia
adam
anything from 130 to 180bhp!
Do I need to deck the block when I use the v6 pistons?
depends on what con rods you use, if you use pinto ones yes
Probably will just use pinto,ones only looking to achieve 150/160bhp
you will also need to narrow the con rod small ends
I’m beginning to wonder if I’m cheaper just going for The correct rods and pistons for the 2.1 rather than all the farthing about not sure if it will work out the same price when taking all the machining into consideration
just forget 2.1 - its s.london facebook BS lol
edit - but say its a 2.1 when selling it - thats compulsory
What size V6 pistons are you using? You'll need to use 93.5mm to get a true 2100cc that'll actually give you just over at 2113cc. You wont ever get another rebuild should you need one out of that block bored to 93.5mm. 93mm will give you 2090cc and 92.5mm will give you 2068cc.
Mines got 93.5mm pistons and I won't ever bore another block to 93.5mm.
Last edited by rallyrob; 16-01-2020 at 22:21.
I have been there done that and all the rest of it with a 93mm bore both with Pinto and NA Cosworth engines many years ago. The hassle we had with getting the correct pistons and head gaskets was unbelievable back then and it wasn't worth what little bit of extra power was gained, if any. + 40 thou pistons should be plenty for your rebuild. Leave 93mm pistons where they belong back in the dark ages!
Bookmarks