Still on it. Have forgoten to post for a bit. Anyways the roof is on, most welding is done, getting her ready for paint.
more pictures comming up.
Last edited by avtospotter; 21-04-2024 at 11:09.
Fitting the seats
Back from the panel beater after over 2 years...time flies but shes a handfull and the work never seems to end.
Brought her straight to work to weld in some radiator mounts and a few small bits, then seal her up and paint the inside and underbody. Then its off to a paint booth
no time to waste till we go back to work next week, then it needs to be rolling again so its not in the way
2k primer, seam sealer, 2k chipstone done, next up is the interior and boot
side note, never use zinc out of a spray can when doing anything to the car. the sealer didnt stick to it well so i had to redo some parts one morning. 2k primer only. all good now
tinted the chipstone in ermine white, thats where its going
Last edited by avtospotter; 01-05-2024 at 19:26.
Bookmarks