Hi
Hope someone can shed some light on an issue with new brakes.
I'm restoring an RS2000 that has been off the road for many years, so bought new:
Solids discs
Refurbed M16 Girling calipers
Pads
Wheel bearings
I've had the struts powder coated but, following installation on the car and fitting the callipers, the Pads are not lining up with the wear surface of the disc. The pad is approx 5mm in (towards the centre) from the edge of the disc, also the inner par of the pad is really close to the hub par of the disc.
i have rang Burton when the items came from and double checked they are all rs2000 parts, but is seems like the calliper is not far enough out.
What could be the issue be.??
Non RS struts??? Do these have calliper mounting holes closer to the strut ?
Any help appreciated.
Bookmarks