cosworth injecters
looking for advise on injectors ? want to run hopefully 300 ish bhp ? what injector would suit? thanks steve
-
Racer
Re: cosworth injecters
Depends on what the ECU can use! Ford / Cosworth OEM ECU needs low impedance types - most aftermarket types will need high impedance ie. 12 - 16 ohm. Sizewise between 350-400cc @ 3 bar fuel pressure should support 350hp but bigger would allow a bit of headroom.
-
Pit Crew
Re: cosworth injecters
803 known as greens will give you around 330 bhp with an off the shelf chip if your useing the standard Weber ecu
-
Re: cosworth injecters
thanks for advise lads,
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks