speedodrive T9...plastic gear ok...but not spinning
my speedo does not work (it never worked since the car came to me). speedocable is ok.
so i took-out the plastic speedo-drivegear from the gearbox....and its not worn....also tested with a new one
investigated through the big hole if the (steel)gear inside the gearbox is spinning: yes it does
but it loks like the 2 gears do not engage deeply enough when assembled. for me it looks like the gearbox gear sits to far to the rear
is it possible that , if the gearbox was refrubished in the past, somebody did a mistake in assembling the output shaft in a wrong position?
-
Re: speedodrive T9...plastic gear ok...but not spinning
i think i found the answer here:
https://www.lotus7.club/forum/techta...m-output-shaft
the worm-gear may have walked away or was fitted in wrong position during a past rebuilt of the box....i expect the later one.
as the local garage who took care abouth the car for the former owner did all wrong....nearly all repairs or maintenance during the last 10 years were not made correctly (but the owner paid huge bills)
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks