Trying and failing to find an alloy radiator for my capri v8 conversion need top left and bottom right inlet and outlet, what are others using? Or is custom the only way? Will be sbc lump.
Trying and failing to find an alloy radiator for my capri v8 conversion need top left and bottom right inlet and outlet, what are others using? Or is custom the only way? Will be sbc lump.
LOL - can't imagine they are too common that people have an opinion? You may find a HD one suitable for the V6 available but if that doesn't tick the boxes than custom is the only answer.
I saw a place recommended in regard to Zetec's in Escorts but don't recall the name - was good quality, UK made and relatively cheap - maybe someone else will know?
Mishimoto give decent photos and dimensions on their site, although sometimes you need to dig a little to find them.
If you can find something off the shelf, it does make life easier, especially if you need a replacement.
I'm using some Mishimoto BMW rad on my Granada at the minute. BMW Z3 X-Line Performance MMRAD-CON-99X
If I was n/a I could and would have chosen something a lot wider. My previous rad was a custom one, but on a price and convenience point, this was close enough and just needed a little adaption to fit.
Other option is to find one you think fits, then buy a used OEM unit.
Last edited by stevieturbo; 26-03-2021 at 15:17.
9.85 @ 145mph 202mph standing mile
https://www.youtube.com/watch?v=Ss_c7fML3rw
Bookmarks