Mk1 / 2 Escort bits for sale. Collection from M25 / Dartford Bridge

[RS2OOO]

All prices are based on collection. Would be happy to post at cost price.

4-2-1 Pinto exhaust manifold. Has been fitted in both MK1 and MK2 Escorts with no clearance issues, 2.25" collector. Was no noteworthy difference in BHP between this and an expensive manifold on rolling road with a 165 BHP engine. BEST OFFER OVER £35



MK1/2 Escort 2.4 ratio quick rack with metric threads in good working condition. Has a slightly longer pinion than most racks so is Ideal for WCXM with lowered rack mounts but since I've had it fitted to a WCXM with both lowered and standard rack mounts I had to file a groove in the stem so it will also fit the standard rack mounts. BEST OFFER OVER £50

Mk1 Escort genuine Ford Bonnet. Complete with all bonnet furniture and bonnet stay rod. This bonnet does have a kink which is visible in photos where the paint has split. This occurred when car rolled into another car at about 3mph so damage isn't too bad but will definitely need work. BEST OFFER OVER £180

MK1 Escort full length bumpers with (and without) overriders. Poor condition. I have a few of these lying around, front and rear, all in equally poor condition with pitting and rust. Some fixings included on some bumpers. 1 bumper photographed as an example of condition. £15 FOR EACH BUMPER.

One very low miles HT1 Cam Kit and a cracked very-big valve injection head thrown in for anyone brave enough to attempt a repair. Cylinder head was built by Roland Hayes of HT Racing using 48mm Citroen inlet valves and 36.2mm exhaust valves. I can't remember how many miles its done, definitely no more than 1000, probably less than 300. Camshaft is mint. Despite some now dated build techniques the engine ran very well and produced good power. It was only stripped from block to have unleaded seats fitted and a crack (circled in photos) was found on no.1 cylinder. BEST OFFER OVER £200 gets the full cam kit and cylinder head and valves thrown in.



As I work my way through clearing out the Garage there will be more bits for sale in the coming months, including Mk1 glass, some trim, 13" revolution wheels, pedal box, heater box, large and small hole strut top mounts, complete 9" drum assemblies, handbrake rod and numerous other bits and pieces. Won't be listing these items until they've been properly inspected but welcome to register your interest with me.

[RS2OOO]

Pictures continued:

[RS2OOO]

Bonnet has sold and been collected.

Some bumpers have sold, some still remain.

Pedal boxes have sold, still have one left but undecided whether to sell.

All Heater boxes/units have sold.

Revolution wheels have sold.

9" drum assemblies have sold.

HT1 Cam kit and cylinder head have a buyer but no deposit taken and he hasn't collected for weeks now, so potentially still available.

Rear axle handbrake rod assembly still available.

Manifold still available

Steering Rack still available.

Small hole strut top mounts still available. (May also have some large hole knocking about).

[garageman]

I will have the manifold if you can post to Cornwall, thanks

[harrysb]

I’ve sent you a message regarding the steering rack. Thanks

[RS2OOO]

I’ve sent you a message regarding the steering rack. Thanks

Have now replied to your message - Apologies for late reply, I didn't realise I was logged out of this site and didn't get any notifications of your PM.

All items have sold except I still have some bumpers left and still have the rack.