ARP conrod bolts for the I4 2.0l 16v mk5 escort engine

[freddy686868]

Basically i can not find ARP conrod bolts anywhere apart from burton power at the price of £100 plus p&p. So i have asked on the RS2K forum and i was given the part number ARP 151-6003 for standard rods (£57 on ebay). When i went to buy these bolts it says they will only fit a Zetec engine can anyone help me out or know for a supplier of ARP bolts in the uk i could ring and ask for the part number. Also i have looked on burtons website to try and find the arp part number but they have cleverly used thier own part number on the website. Thanks, John

[Graham]

perhaps you can meassure length, thread size, pitch etc and match them with something else, if i remember rightly arp also list bolts by size?

[freddy686868]

perhaps you can meassure length, thread size, pitch etc and match them with something else, if i remember rightly arp also list bolts by size?

Yeah that wouldn't be a problem as i have all the geqr in work but i haven't had time to remove the old rod bolts yet. Your right too with the ARP listings i have seen the list all the dimensions online. Lucky i have asked on the rs2k club and it looks like good old fords had a load of rod bolts left over from the i4 and stuck them in the zetecs. So the bolts are the right size. Thanks again though, John

[thepintoman]

Give mountune a call
After all the did build the f2 maxi escort engine

[freddy686868]

Give mountune a call
After all the did build the f2 maxi escort engine

thanks for the reply but the zetec ones are the same and fitted.