The boot more organized:
The fire extinguer in place:
The spare wheel(s):
The remote oil filter in place:
And the alternator with the new polie:
The boot more organized:
The fire extinguer in place:
The spare wheel(s):
The remote oil filter in place:
And the alternator with the new polie:
Just a few pics...
The prop shaft in place:
And the alternator in place too:
The steering wheel has arrived:
With the quick release:
The Nozzle holder:
I think I'm going to cut them a bit...
Just a litle update...
Finally the roll bar is in place now the work will progress more rapidly (I hope… )
It still needs the bar under the dash:
All the nuts and bolts are going to be change and the rollbar is going to be painted in grey...
Almost there :
This week was time to do the electric steering and to test the place where the steering wheel is going to be place...
This week update...
The hand brake:
The stering wheel in place:
The rest of the rollbar:
And that is it for now...
And a few more developments...
The other baquet in place:
The rest for the clutch foot:
And the rest for the codriver foots:
The remote adjuster for the bias box:
And the adjuster for the rear and front brake:
The final (?) peace of the rollbar:
One step back two steps forward...
Not pleased with the colour I think I'm going to change it to black...
Plumbing...
More Pumpling...
The door cards and rear quarters
Dashboard:
The battery in the trunk:
And to secure the boot and the bonnet:
I hope you enjoy the progress so far…
The work began in 03/03/2012 almost 6 months ago and this is where the project is today...
From now forward I’ll update this thread until the car is finish I think is going to be ready until the end of next month.
Fantastic looking project mate
http://escort.accelerator.org
1968 MK1 Escort 1300GT
1969 'Big Wing' MK1 Escort
1972 MK3 Cortina 1600XL
1984 Sierra XR4i
And other junk I don't like to talk about!
If i was going to build an anglia in the morning, this is exactly how i would build it. Its gorgeous, well done sir.
awesome build up. Do you have some picture of the rollbar fitment ?
some nice work (and bits) there, thanks for sharing
All I got for christmas was a sweater, I really wanted a moaner or a screamer......
Very nice build with top quality parts, will be a cracking anglia when it is finnished!
Cheers,auld
Stunning....
Shaun
Outstanding work! What a fantastic looking car! You're fairly pouring the money into it as well, but wonderful results!
Please 'Like' us on FB!
https://www.facebook.com/pages/Jana-Kitchen-UK/393933930736835?ref=hl
That is one tasty looking car, very nice indeed
And thats the way to do it
thats a proper anglia, very well built, going to be fantastic to drive that when done
its not dead till it's buried!
T.I.T engineering. "Feel the power!"
great thread.
Awesome build dude! Please make video and post it! I would like to hear how this beast sounds like
Thats the dogs danglies mate well done
Wry smart indeed. How people can build a car leaving no traces of oil, fuel, grease or any other shite in sight is beyond me! Haha, very nice build, good man!!
Congratulations very nice work. I'm glad for us portuguese to be more active on restoration of this quality. "Um grande abraço para mais um fordista com alma e boa continuação de excelente trabalho"
Best regards
Almost finish…
The work is almost done only minor things to do and then it goes to the electricity guy to do the loom of the car....
The interior:
And the front rollbar and carter protection in position:
And that is all for now..
The car is ready to go to the electricity guy...the only thing that is need to finish is the Brantz that is going to be putted in the glove compartment...
The fuel lines are ready:
The turn indicator, horn and hi-low lights:
The exaust system is in place:
The ride height:
Next week electricity and then start the engine...
Very nice mate, it's coming along quickly
Cracking car, and project you have almost completed. well done that man
Old skool forever
Just don`t tell the wife
how much it really costs!
Lovely that !!!
Bookmarks