I'm really sorry for asking this question again but the colour of the wiring doesn't match up to any of the wire colours in all the guides set up already. Basically i have the electronic ignition unit and the wiring off the transit lump and an electronic dizzy of a sierra this is all going into a mk3 capri laser that in it's self isn't a problem. From what i have read on the internet i have the same ignition module on the heat sink plate as the sierra as it has the same code, but the wiring is all different colours. Does it actually matter that the colours are different or do i just wire it up as per the sierra diagrams? link in the link?
http://www.antonys-workshop.co.uk/electronic.htm
pictures of the stuff i have now.
Purple (pin 4) and orange (pin5) to the dizzy
Green (pin 1) ??????
Black (pin 2) goes to a plug
White (pin 3) ????????
purple (pin4) Dizzy
orange (pin5) Dizzy
brown (pin6)?????????
Green and blue goes to a small plug that looks like a water temp plug to a loose end
Big black and yellow wire seams to fit only on the + side of the coil
Red and white wire seams to go to the - side of the coil and also goes to a loose end although the black wire fits on there too.
Bookmarks