This is the results of my most recent build
The spec is
2050 Pinto
136mm PEC I-Beam rods
Woosner pistons
Ported head (44.5mm inlets 38mm exhausts valves)
12:1 compression ratio
Crane roller cam 260 degrees duration @ 50thou lift
Esslinger Valves.
Custom tuned distributor from Jason (Rwd fords rule)
Cranks scraper from Jason (Rwd Fords rule)
Standard Pinto Crank triple doweled to flywheel.
Modified Twin 50 carbs
Tuning in the car by RWD Fords
There was only one power run on the dyno with no tuning
A little in car from the sligo Rally
http://www.youtube.com/watch?v=l22-tRzHMww
Tom
Bookmarks