Converting standard mk1 escort pedal box to bias
Hi People.
As the title suggests i have the raw ingredients i just need a few dimensions and possibly some photos at other peoples creations to make sure i'm along the right lines. I want to keep it cable clutch so my main problem i see at the moment is clearing the clutch pedal.
Any advice appreciated
Dan
-
Re: Converting standard mk1 escort pedal box to bias
Here's a pic of my effort! not sure if it will work yet lol.
have done a couple of mk2 ones before so here's hoping.
-
Re: Converting standard mk1 escort pedal box to bias
Hi, Thanks for the photos, what have you done about the top of the clutch pedal so that is clears the bias bar?
-
Re: Converting standard mk1 escort pedal box to bias
Cut of the top of the pedal, then extended up, so the clevis misses the clutch pedal.
will take a better photo and stick it on here.
Martin
-
Re: Converting standard mk1 escort pedal box to bias
Hi, anyone on here that converts the original to a bias pedal box.. thanks
-
Racer
Re: Converting standard mk1 escort pedal box to bias
look up oldskoolrools on here or arrow engineering (andy)on the web same chap helpful and has a good rep
Last edited by wildo105e; 13-03-2017 at 19:46.
The Following User Says Thank You to wildo105e For This Useful Post:
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks