What to do when

[RobS2]

Just after a bit of advice. If you were fitting floors, inner sills and outer sills - what order would you fit them. Parts of the floor and sills are still there

Does anyone have a picture of how the wing mounting railing on the inner wing should meet up with the rail closer to the bulkhead.

Cheers

Rob

[oddy]

Hi there,
Have you got any pics?
If you have get them up and can advise from there, I normally start with floors, inner sills followed by outer sills, depends on how much is left really! Whatever you do try to replace one panel at a time, don't just cut everything out as you will have nothing left as a reference, hope that helps?
Cheers,
James

[RobS2]

Hi James thanks for the reply. It is on Huxleys resto thread. We are just finishing off the inner wings / front end, but planning the next stage. I'll get him to add some more pictures as he is a bit of a slacker!

[Huxley]

Hi James thanks for the reply. It is on Huxleys resto thread. We are just finishing off the inner wings / front end, but planning the next stage. I'll get him to add some more pictures as he is a bit of a slacker!

Oi pot and kettle come to mind !

I haven't got any of the inside yet I'll get some later in the week