Evening all,
Next one is Glen's very sorry looking RS2000,
Plan is is to start with the front, It needs a fair amount of work, a few pics to set the tone....
Let's get started with the first of many holes,
Fixed,
On to the otherside,
Even had to make a new bit for the heater shroud,
New bubble spot welded on,
The lower lip/bulkhead needed a repair,
With the bulkhead repaired it's time to remove this bit,
First trial fit,
So there we go, first update with plenty more to come!
Thanks for looking,
Cheers,
James
Bookmarks