User Tag List

+ Reply to Thread
Page 3 of 3 FirstFirst 1 2 3
Results 81 to 94 of 94

Thread: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

  1. #81
    Pole Position Decade Plus User freddy686868's Avatar

    Join Date
    Jul 2010
    Location
    South Wales
    Age
    34
    Posts
    4,689
    Thanks
    221
    Thanked 245 Times in 226 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Quote Originally Posted by Andrew@ALD View Post
    more injectors doesn't mean more fuel but it does mean better atomisation when staged with the others. They will be controlled with info from throttle angle and loads
    Sounds like a good idea. How many i4's have you set up like this and what sort of increases have you seen? I'm guessing they are all top end increases.

  2. #82
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,099
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Quote Originally Posted by freddy686868 View Post
    I had to cut them



    The shortest they will go is 40mm too as the locking collar hits the trumpet flare. Otherwise i would have liked to have tried them shorter. I think if i had room for a 90mm trumpet it would have gotten better but it was at the stage were it had to get worse before better and would couldn't push through the worst of it. Just a very vaigue thought too maybe the higher capacity 4 pots like a shorter trumpet?
    arhh in that case i can sell you some shorter bodies

  3. #83
    Pole Position Decade Plus User freddy686868's Avatar

    Join Date
    Jul 2010
    Location
    South Wales
    Age
    34
    Posts
    4,689
    Thanks
    221
    Thanked 245 Times in 226 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Quote Originally Posted by caprimentle View Post
    not bad, very good power, had to translate the torque lol, bout 153 ftlbs, was expecting more torque from it. how you finding the mapping? easy or hard?
    I'm impressed now. Still not finished but much better!
    The first ever power run


    The last run to date but the rollers tripped out at 6700rpm :-/


  4. #84
    Pole Position Decade Plus User freddy686868's Avatar

    Join Date
    Jul 2010
    Location
    South Wales
    Age
    34
    Posts
    4,689
    Thanks
    221
    Thanked 245 Times in 226 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Quote Originally Posted by Graham View Post
    arhh in that case i can sell you some shorter bodies
    Haha brilliant. Nah i think i will angle the inlet next and map the ignition and leave it there. Just to see what works really. I really want to swing the inlet cam too but that would mess up the current mapping too much so i won't be doing that.

  5. #85
    TURBOSPORT SPONSOR Turbosport Sponsor

    Join Date
    Mar 2014
    Location
    Leeds
    Age
    45
    Posts
    185
    Thanks
    8
    Thanked 18 Times in 17 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Quote Originally Posted by freddy686868 View Post
    Sounds like a good idea. How many i4's have you set up like this and what sort of increases have you seen? I'm guessing they are all top end increases.
    None on a I4 but did it on my old Zetec and made similar set ups for other people.

    Gained 15bhp more on my old Zetec.
    A.L. Developments Fabrication and Engineering
    Cylinder head ported and polish work for
    Ford Zetec, ST170, CVH, 2.0/2.3 Duratec, I4, Volvo Modular head I'E Focus ST/RS 2.5, N/A YB
    XE, Vag 1.8 20vT, Vag BJS/BML, Vag AGZ/AQN ,F4R730 172/182, C1J Turbo

  6. #86
    Racer Decade Plus User

    Join Date
    Mar 2010
    Location
    Edinburgh
    Age
    46
    Posts
    3,641
    Thanks
    68
    Thanked 234 Times in 230 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Quote Originally Posted by freddy686868 View Post
    Loads of time on the laptop again! At some points i wish i had stuck with webers :P
    I prefer webers but only because I have no experience with fuelling mapping, still reckon cam timing should be played with a bit.

  7. #87
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,099
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Quote Originally Posted by freddy686868 View Post
    Sounds like a good idea. How many i4's have you set up like this and what sort of increases have you seen? I'm guessing they are all top end increases.
    i ran my s14 double injected, but that was only because i carried over the set up from my previous engine, although a lot of the really quick s14s are double injected
    talking to dave some engines work better double injected others not. i know when we tried it on my 2.0 2002 engine, it gained 12bhp @5000rpm but the peak power was the same

  8. #88
    World Champion Decade Plus User alladdin's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    May 2005
    Location
    s.wales
    Age
    60
    Posts
    9,200
    Thanks
    167
    Thanked 446 Times in 432 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Quote Originally Posted by freddy686868 View Post
    Sounds a very nice motor indeed but i have built and tunned this engine myself. It is not a flat out race engine it hasn't been mapped by a pro, it is using correctly reading rollers (not that yours weren't) and we haven't advanced any of the ignition yet. It is also still on hydraulic lifters. It has no means the meanest i4 engine ever built but it is my mean i4 engine. Designed,built and tunned but one amature although my friend helped greatly with the mapping. So the fact that it made the same power as a 10k jre 2l xe (just much more torque accross the range) on the same rollers means the engine is good enough for a first build/potch. I have saved thousands, had fun. An engine i csn put my name to and learnt a load too.

    Rant over i guess haha.

  9. The Following User Says Thank You to alladdin For This Useful Post:


  10. #89
    TURBOSPORT SPONSOR Turbosport Sponsor

    Join Date
    Mar 2014
    Location
    Leeds
    Age
    45
    Posts
    185
    Thanks
    8
    Thanked 18 Times in 17 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Here is my old set up




    Without the air box

    Last edited by Andrew@ALD; 06-02-2015 at 19:20.
    A.L. Developments Fabrication and Engineering
    Cylinder head ported and polish work for
    Ford Zetec, ST170, CVH, 2.0/2.3 Duratec, I4, Volvo Modular head I'E Focus ST/RS 2.5, N/A YB
    XE, Vag 1.8 20vT, Vag BJS/BML, Vag AGZ/AQN ,F4R730 172/182, C1J Turbo

  11. #90
    Pole Position Decade Plus User freddy686868's Avatar

    Join Date
    Jul 2010
    Location
    South Wales
    Age
    34
    Posts
    4,689
    Thanks
    221
    Thanked 245 Times in 226 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Quote Originally Posted by Andrew@ALD View Post
    Here is my old set up




    Without the air box

    Very nice maybe a little over the top for my build. I doubt i will ever go down the twin injector route although it does intrest me. What sort of rpm would the second set of injectors kick in?

  12. #91
    Pole Position Decade Plus User freddy686868's Avatar

    Join Date
    Jul 2010
    Location
    South Wales
    Age
    34
    Posts
    4,689
    Thanks
    221
    Thanked 245 Times in 226 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Just looking at when we got the engine running on the base map to where we are now. No wonder it feels like a different engine.




    The much better but nowhere near final map.

  13. #92
    Pole Position Decade Plus User freddy686868's Avatar

    Join Date
    Jul 2010
    Location
    South Wales
    Age
    34
    Posts
    4,689
    Thanks
    221
    Thanked 245 Times in 226 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    Quote Originally Posted by Graham View Post
    i ran my s14 double injected, but that was only because i carried over the set up from my previous engine, although a lot of the really quick s14s are double injected
    talking to dave some engines work better double injected others not. i know when we tried it on my 2.0 2002 engine, it gained 12bhp @5000rpm but the peak power was the same

    At what rpm did you run the second set of injectors and did you basically half the cycle duty of the injectors on the ecu when they came in? Also were the second set of injectors a lot smaller than the originals in cc?

  14. #93
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,099
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    on both setups we have brought the second injectors in at around 3000rpm, but only near full throttle, or it will just bog when the outers come on. ive done it with two sets of same size and with one set bigger, if you use different size injectors then put the bigger ones as outers, but yes when the outers switch in you basically half the fuel to the inners.

    i dont know about any others but the emerald can correctly vary the injector duration to suit differing size inner and outer injectors as long as you tell it the different flow rates

    the ecu can work in one of two ways, either switching the outers on when it runs out of duty cycle on the inners, or if you are double injecting to gain a better fuel spread rather then because one set are too small, it can be set to "force" a change over, ie turn the outers on at a set point rather than just when the inners are flat out
    Last edited by Graham; 09-02-2015 at 00:50.

  15. #94
    TURBOSPORT SPONSOR Turbosport Sponsor

    Join Date
    Mar 2014
    Location
    Leeds
    Age
    45
    Posts
    185
    Thanks
    8
    Thanked 18 Times in 17 Posts

    Re: 2341cc 12/1 16v cammed 48mm jenveys, guess the power

    I forgot your still on hydraulic tappets still..

    Swap to solids and shims.. Look for Red top XE solid insert conversion and shims, they will fit your tappets
    A.L. Developments Fabrication and Engineering
    Cylinder head ported and polish work for
    Ford Zetec, ST170, CVH, 2.0/2.3 Duratec, I4, Volvo Modular head I'E Focus ST/RS 2.5, N/A YB
    XE, Vag 1.8 20vT, Vag BJS/BML, Vag AGZ/AQN ,F4R730 172/182, C1J Turbo

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts