Hi guys,
I've got a cobra kitcar from a friend with a 2.9v6 cologne
The car had troubles with electrics because somebodywired it up al wrong causing it to melt most of the wiring (nothing related to engine management though i think.
So anyhow i took out al the electrics and started doing them all again beginning with the engine.
Now the problem is the engine wont fire up.
I've got spark. And fuel pressure. I've got ground at injectors with contact off and no ground with contact on. So the ecu is able to control that. I've got 12v at injectors while ignition is on and when i'm cranking. While cranking the eec-v turns on the fuel pump. So it knows the engine is spinning so the distributor and its module and its wiring to the ecu are ok, right?
Now why wont the eec-v control the injectors? Any ideas? Is the eec-v broken?
Thanks for help in advance guys!
Bookmarks