yes m8, i still have a couple.... £65 posted but would have to check the postage to you
cheers davy
yes m8, i still have a couple.... £65 posted but would have to check the postage to you
cheers davy
Hi. What is the difference in weight between these and standard?
Also, can't work out how these remove the need for an extra pulley?
Thanks
Because the belts operation on the opposite side of the pulley ie back of belt on left as stock and ribbed to right on this one the pulley and pump rotation is reversed so the belt run and length is shortened to a triangular route - crank-WP-Alternator and avoids all the idlers needed with the serpentine routing. Compared to the steel pulley I used, this is easily half as heavy!
You do need a reversed impeller WP though - stock run backwards doesn't perform adequately in flow terms!
I fitted an IKE reverse impeller and the alloy pully, so i have a triangle arrangement of crank,W pump and altenator which allowed me to bin the retroford pully thingy...Tidy
what they guys said. main thing for me was it looked a lot tidier.... cheers again guys
i don`t seem to have any pics with it the alternator etc bolted up, i`ll try get one later
Hi. Can't reply to your PM as it says I don't have enough posts yet. Can you PM me your paypal address. Thanks
Pm sent
Payment sent (still can't pm as post count not yet 10).
hi jordan, got the payment, can you message me your details and i`ll get it away to you, feel free to reply to me another couple of times and you will be able to pm folk in no time
cheers davy
yeah, need one more post to be able to PM you my details
A post like this one should do it ;-)
PM with details sent. Cheers
Hi there d8vyr, I'm also interested in one of these. Have you got any left still? Cheers, Ashley
hi ashley, i have 1 left m8
ok cool. could you send me the payment details through and i'll get the money to you later today?
Jordan.. that's yours posted
Astley. .. you have a pm
Hi Davy, sent the money through and a pm with my address too
pm`d ashley
Any left?
Davy you have pm
ashley, you have a reply
Received - thanks. What belt do I need for this with standard alternator?
pm'd
hi davy. sent you another pm
not just me being ignored then!!!
I got a message from him a few weeks ago. He'd sold out but would post on the forum when he had some more.
cheers adam
ashley pm returned
as for ignoring anyone, as far as i knew, i had replied to your message using my phone but just checked and for some reason nothing was sent..
everyone has a different install, i run my alternator on the drivers side plus i have shaved the part of the front alloy pulley(where the original engine mount bolts to) this allows me to run a very short belt
haven`t got any pics of the complete set up
Pulley arrived today. After a problem with the order d8vyr has gone above and beyond to help me out. Thank you. Top bloke!!!
glad you got it ok, mind put pics up when it`s fitted, cheers davy
any news on the next batch?
going to see the guy in the new year m8
nice one, keep one for me please
will do m8
just found another pulley in my box of bits if anyone can`t wait till the next batch. only fair that Adam Coull and mexzetec have first refusal
cheers davy
i'll take it please
Bookmarks