Pit Crew
Re: zetec blacktop alloy water pump pulley
Got some more pulleys if any one is still interested
-
Re: zetec blacktop alloy water pump pulley
Would it be possible to make this in a smaller diameter?
-
Re: zetec blacktop alloy water pump pulley
Sorry, Should have explained:
I`m looking at driving the Water Pump from the Cambelt Idler.
Experimented by bolting a pulley to the standard Idler which actually turned the Pump the correct (Anti Clock) direction.
This worked fine on a track car i had but as the pulley was a smaller diameter than the Crank Pulley, i figured using a smaller W/P Pulley would get the revolutions closer to original.
-
Re: zetec blacktop alloy water pump pulley
Sorry, Should have explained:
I`m looking at driving the Water Pump from the Cambelt Idler.
Experimented by bolting a pulley to the standard Idler which actually turned the Pump the correct (Anti Clock) direction.
This worked fine on a track car i had but as the pulley was a smaller diameter than the Crank Pulley, i figured using a smaller W/P Pulley would get the revolutions closer to original.
-
Racer
Re: zetec blacktop alloy water pump pulley
Off topic - but what's the benefit? Or do you run total loss electrics also?
-
Re: zetec blacktop alloy water pump pulley
Yeh,
Been using Zetec in Mazda RX8 but not enough clearance to run the Crank Pulley!
It`s a Track Car so no electrics to run. Just Water Pump needs driving. Did consider an electric pump but not sure how long battery would last.
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
what size where you thinking m8, i`ll ask the engineer if he could do a smaller one
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
still got a couple of pulley`s left
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
-
Re: zetec blacktop alloy water pump pulley
Do you still have any of the pulleys for sale
thanks in advance
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
yes m8, i`ve a couple left
-
Re: zetec blacktop alloy water pump pulley
Brilliant, i may require one, i will keep u posted if i do.
Im currently stuck as to how the alternator and tensioner pulley mount to the black top engine, i have a reverse waterpump impellor to go on and the engine mount has been fabricated, im just stuck as to how the auxiliarys bolt to the engine.
Any help would be much appreciated.
Thanks in advance
-
Racer
Re: zetec blacktop alloy water pump pulley
If you've a reverse impeller then why are you bothering with idlers and tensioner pullies? Simple belt run - crank - water pump - alternator (which is the tensioner).
-
Re: zetec blacktop alloy water pump pulley
I also have power steering to take into account, i am still stuck on the bt waterpump fouling the original bracket the alternator is mounted to
-
Racer
Re: zetec blacktop alloy water pump pulley
A picture may help and provide a solution but in the meantime if the PS is required this would be the std layout with idler replacing the PS so not requiring the reverse impeller and lower picture is with all the crap attached - just omit the AC compressor and shorten the belt.
-
Re: zetec blacktop alloy water pump pulley
My alternator is front mount, thank you for the pic tho
-
Racer
Re: zetec blacktop alloy water pump pulley
-
Re: zetec blacktop alloy water pump pulley
My alternator mounts to the front of the engine, just below the power steering pimp, but the pic you have posted up shows it mounted to the rear
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
-
Re: zetec blacktop alloy water pump pulley
Hi mate do you still have any of these
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
yes m8, i have a couple left
-
Re: zetec blacktop alloy water pump pulley
Hi do you have any left desperately need one
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
how urgent do you need it m8
-
Re: zetec blacktop alloy water pump pulley
Within the next few weeks ideally
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
i`m waiting on some, i`ll check and let you know
-
Re: zetec blacktop alloy water pump pulley
-
Re: zetec blacktop alloy water pump pulley
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
hi m8, i`ll nip down tomorrow and see if i can get an idea of time to get some done but if you need one sooner, i`ll sell you my spare
-
Re: zetec blacktop alloy water pump pulley
That would be great if you could sell your spare as im ready for it to be on and start up then pm me some details as i cant pm yet
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
-
Re: zetec blacktop alloy water pump pulley
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
hi m8, totally forgot about this. do you still need a pulley
-
Re: zetec blacktop alloy water pump pulley
do you still make these pulleys ?
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
-
Re: zetec blacktop alloy water pump pulley
how much are they including delivery ? as its pretty much all i need to finish my enfine build
-
Pit Crew
Re: zetec blacktop alloy water pump pulley
-
Re: zetec blacktop alloy water pump pulley
i should have cash transferred into paypal tomorrow could you message me your paypal details please
-
Re: zetec blacktop alloy water pump pulley
Yeah still need one mate will you pm payment details please
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks