Originally Posted by
RWD_Fiesta Many years ago I successfully fitted roller bearing top mounts to a small hole RS2000 without modifying the inner wings. I had a 10mm thick alloy spacer made to sandwich between the two. Countersunk holes and socket head screws secured the spacer to the top mount and on a slightly different PCD, I fitted captive studs to match the inner wing holes. The spacer was even black anodised for good measure and worked well and looked spot on. The 10mm spacer was enough to allow the slightly tapered tower of the top mount to clear the hole. The thickness of the spacer also made very little difference to the ride height.
Bookmarks