Stage 3 T3
I am going to be running a 2.1 ZVH as from 2 weeks now which has been gasflowed camed, fitted with cossy injection and every thing that you can think of to help me run 24psi boost do you think that a stage 3 T3 will be able to push this with a -31 actuator and if not what would be required to gain this and at what expanse just for the parts
Cheers Dan
Hybread DNA
-
Re: Stage 3 T3
a stage 3 should run 24psi fine mate.
considering that a standard t3 can run 18psi fine
-
Re: Stage 3 T3
Is that 18psi on a 1.6 engine or a 2.1 engine?
-
Re: Stage 3 T3
1.6, you're best bet is to talkt o either karl norris but he is overly busy, or stu from motorsport developments. he also posts on passionford.
-
Re: Stage 3 T3
Well I'm bolting everything together and dumping it in next week with the stage 3. I'll let you know what it gets
-
Pole Position
Re: Stage 3 T3
Would you not be better off using a t34 with this setup? a t3 will run out of puff at the top end. I take your zetec will rev to around 7k?
-
World Champion
Re: Stage 3 T3
I'd go t34 myself. as said.. hjave a word with a tuner an dsee what they reckon. if you get the turbo spec wrong it's strangle your engine's power big time.
-
Re: Stage 3 T3
How much would a T34 cost? Has anyone got one they want sell?
-
Pole Position
Re: Stage 3 T3
A cossie t34 wonf fit and RST manifold so you will have to get made as a one off I suppose. Second hand cossie t34 go fro around £300 to £350ish
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks