English axle spacers?

[marshyboy2002]

Hey guys after my episode on not being able to get the rear wheels back on the car the other week after fitting the new coil overs I now need to sort something out to get her rolling tidy so I can cracking on with it
Bearing in mind I'm as green as gets with all these added extras and just been asking and looking with others up to now
I will be getting an atlas axle built up in the next few months butt for now it's going to have to be the old English
What's the views on how to get this spaced off then guys as at the moment the capri laser wheels don't even fit on there

[Nelly]

So I presume the wheels now hit the coilover?
With longer studs you can use up to 1/2 wheel spacer just sandwiched between the wheel and the halfshaft.
If that's not enough you can get much thicker spacers that bolt to the shafts with standard studs and nuts and have their own studs you then bolt the wheels to.

[Erikmex]

Use hubcentric spacers that have spigots for mounting the wheels

[marshyboy2002]

Nice one guys might go for the bigger bolt ons

[alladdin]

Nice one guys might go for the bigger bolt ons

i may have a new set here cheaper than burtons etc ,,,, i bought them for the westfield then used narrow ones.

i will have a look fri afternoon if your interested.

[marshyboy2002]

i may have a new set here cheaper than burtons etc ,,,, i bought them for the westfield then used narrow ones.

i will have a look fri afternoon if your interested.

Nice one bud do u no how thick yours are?

[freddy686868]

Hey guys after my episode on not being able to get the rear wheels back on the car the other week after fitting the new coil overs I now need to sort something out to get her rolling tidy so I can cracking on with it
Bearing in mind I'm as green as gets with all these added extras and just been asking and looking with others up to now
I will be getting an atlas axle built up in the next few months butt for now it's going to have to be the old English
What's the views on how to get this spaced off then guys as at the moment the capri laser wheels don't even fit on there

if you want a thick tube atlas some time give me a shout i can tube one up for you ;P

[alladdin]

Nice one bud do u no how thick yours are?

Inch and a quarter 32mm Grayson.trial fit only, still in box. Look on the rally design site. They have stud extenders included in kit .

[marshyboy2002]

Inch and a quarter 32mm Grayson.trial fit only, still in box. Look on the rally design site. They have stud extenders included in kit .

How much do u want for them alladdin

[alladdin]

15? i can meet you ?

[marshyboy2002]

15? i can meet you ?

Ye tidy what part of the woods are you in

[alladdin]

Ye tidy what part of the woods are you in

Pm sent

[sholdowa]

turn the wheels around... will they fit then?

[marshyboy2002]

turn the wheels around... will they fit then?

That's what I had to do with the one side which was a standard fiesta steel wheel and that worked for now