hi need to get some rad hoses what do you xe guys use
not using heater matrix
m2 escort with radtec rad
both rad ends are straight
engine at 7 degre
hi need to get some rad hoses what do you xe guys use
not using heater matrix
m2 escort with radtec rad
both rad ends are straight
engine at 7 degre
bottom hose i bought a 180 bend and then had to use a joiner to the bottom, top house i used an omega top house from a 2.0 ecotec
Thanks again guys just bought them from motorsport tools
So with these hoses from Motorsport tools, where do you run the hose from the inlet manifold to? can you just blank it off? or does it not have to join into the bottom radiator hose? Im not using a heater matrix either.
its highly not recommended to block the inlet manifold water outlet, thats where the coolant recirculates when the thermostat is closed.
just use a T piece to join it into the hose coming off the back of the water pump if your not using the XE water rail
Bookmarks