Cosworth cam bearings

[mark2cossie]

Fitting new cams are these too small or is something missing?
img]http://media2.turbosport.co.uk/2013/11/2016040716345203194image.jpeg[/img]
[img]

[mark2cossie]

[mark2cossie]

img]http://media2.turbosport.co.uk/2013/11/2016040717462825337image.jpeg[/img]

[Graham]

iirc the bearing goes in a carrier which the cap holds down, 2 and 4 wheel drive cams are different as are the bearings iirc

[mark2cossie]

Thanks again graham ..... Have you any idea where I can get the carriers from? its a 2wd head

[xpackboy]

Does this help ? 2wd head

[Forest_rallying]

Don't forget you need a seal kit and spacers too for the bearings.

I have somewhere a scrap NA 2wd head, if I can ever find it you would be very welcome to the Cam caps assuming they are still with the head.

[mark2cossie]

Don't forget you need a seal kit and spacers too for the bearings.

I have somewhere a scrap NA 2wd head, if I can ever find it you would be very welcome to the Cam caps assuming they are still with the head.

Thanks for the offer think I have what I need now (well hope anyway) are you still running n/a

[Forest_rallying]

I am glad you got sorted out. We sold the Escort with the NA Cosworth engine in the late 90's to buy a 4wd Sierra and then an Escort Cosworth Rally car. Now we are slowly building a Mk 2 with a Pinto in it and then eventually a 2.5 Duratec if time ever permits.

[mark2cossie]

Funny how we always seem to find s way back to an escort isn't it
Sent you pm mate