Talbot sunbeam
Collapse
X
-
Talbot sunbeam
Hi Brynmor , still working on it, interior and all wiring now done, front coilovers , rear bilsteins and quickrack fitted , just need to fit the engine and powdercoat some things before refitting , ive also tried to make a custom intank fuel pump mount to run the xe, hopefuly it should work with no fuel starvation , ill keep you posted cheersComment
-
Talbot sunbeam
A bit of progress today , steering arms drilled out to take 1/2 bolt to match the rose joints
Engine finally put into place ready to be mounted, luckily the gearbox lined up to the existing mount which left me with couple mm between back of engine and bulkhead, the powercap is very close to the brake cylinder, by the end of this week it should be fitted and i can start wiring the injectorsComment
Comment