Bodger
2 missing female pins in mj plug
hi there i got a megajolt map 2nd hand,and im just gona start fitting it and noticed 2 female pins missing from the mj plug it was the pip and saw,
so i was thinking could i use the one from the tps that do not need to be coneted and the one from something else i dont needif that makes sence
-
Re: 2 missing female pins in mj plug
you can buy both male and female parts of the plug from maplin which is essentially a computer power supply connector, you have to trim a few of the extra blocks off but it works fine. you also get the connectors for the inside of it so you can make up your own.
alternativly you can just cut the motherboard connection of a dead power supply, the wires are all made so its just a matter of splicing it into the MJ loom. again you have to trim the block but its easily done with a craft knife
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks