Can anyone suggest a rev limiter for a xflow fitted with a Bosch electronic distributor. Please note my wife will read this so i need cheap.
Can anyone suggest a rev limiter for a xflow fitted with a Bosch electronic distributor. Please note my wife will read this so i need cheap.
The cheapest is to lift your right foot faster then you want to !!!!!
Reply from Accuspark. Not suitable for factory electronic ignition. Any other suggestions. Keep it clean.
Miniliteman Check out Sticky at top of this section, how to convert crossflow to electronic ignition.Thanks for your reply.
I'm running a Bosch electronic ignition in my Fiesta using a VW rotor arm with rev limiter built in, it cuts in at 5750rpm iirc
Do you have a part no.or VW type, year, etc, for the rotor arm.
Thanks for the reply.
surely 5750rpm is too low for any sort of tuned x/f?
VW rotor arms range from 5400 to 7300.I just need to know which VW rotor arm will fit a Bosch electronic distributor with a side entry cap from a Valencia engine .
I have a omex pro relimiter for sale if it would work. It worked on my pinto with distributor.
Ford Taunus Going RS2300 16v with 48s!!!
Bookmarks