Crossmember Help
Hi guys
Got an issue with my Zetec install, sump is sitting on the steering rack.
Was told SA crossmembers are different and weirdly what I have on my UK car as well is same as my spare SA shell's crossmember.
So went and bought a MK1 Mexico CrossMember, its a couple of CM narrower, great. However engine is still sitting on the steering rack!
Any ideas before I lose my mind :/ Ive got three different cross members, none work and ive been told time and time again by the guy who done the sump and mounts that they are correct.
-
Mechanic
Re: Crossmember Help
Is it possible to space the engine mounts up a little or notch out the crossmember?
What sump is it?
-
Re: Crossmember Help
have you got the correct rubber engine mounts they come in two different thicknesses 38 and 50mm from memory
-
Re: Crossmember Help
Got 50 mm mounts.
I can modify it no problems, but I dont really want to as ive paid good money for this to supposedly fit out of the box..
-
Racer
Re: Crossmember Help
Are you on std X member or World Cup? Normally a std X member is slotted where the mounting bolts for the rubbers go through. Can you jack up the engine and make a spacer to go between the rubber mount and X member? That should raise your engine to clear the sump problem fouling.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks