1600x/f
hi i,ve just bought a 1600 x/flow with a 681 block .im looking to upgrade parts like the cam and fuel pump (old one is a glass bowl) are most of the parts interchangeable with a 711 block.im not going to have it bored out or do anything wild ,so is it worth doing or just buy a 711 enginge straight off?thanks
-
Re: 1600x/f
yes and theres no point in buying a 711 for the sake of it especially if you arnt doing anything radical
-
Re: 1600x/f
so are gaskets and cams interchangable or even oil pumps?
-
Re: 1600x/f
most parts are, cam followers differ in stem dia thou
-
Re: 1600x/f
They are essentially the same block but the 711 is thicker around the bores and therefore stronger and easier to bore out to a larger capacity. They share the same bolt patterns so part changing shouldn't be an issue especially if in standard state.
-
Re: 1600x/f
Believe some gaskets are different, they sell the right kits ...
-
-
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks