Mk1 RS2000 Torque settings

[Fatboynotsothin]

Im looking for the all the torque settings for my Mk1 RS2000, can anyone help ?

[Graham]

Im looking for the all the torque settings for my Mk1 RS2000, can anyone help ?

you could be a little more specific as to what you want to tighen, althernative a haynes manual will have all the important ones

[Fatboynotsothin]

[QUOTE=Graham;3778191]you could be a little more specific as to what you want to tighen, althernative a haynes manual will have all the important ones[/QUOTE

I need flywheel to crank, pressure plate to flywheel, starter to bellhousing and all the remaining bellhousing bolts, it has the correct alloy bellhousing. Thanks

[Graham]

[QUOTE=Fatboynotsothin;3778192]

you could be a little more specific as to what you want to tighen, althernative a haynes manual will have all the important ones[/QUOTE

I need flywheel to crank, pressure plate to flywheel, starter to bellhousing and all the remaining bellhousing bolts, it has the correct alloy bellhousing. Thanks

flywheel to crank is 55lbft,

pressure plate to flywheel never used a torque wrench on them but it would only be something like 16lft.

starter motor and bell housing, again never used a torque wrench on them they are not torque critical, they woudl be about 30lbft.