Hi guys I've done a fair bit of searching especially on this site. I'm building a mild turbo 2.0 pinto. In searching for parts ive noticed a lot of cosworth parts availability in the rod and piston area. With a standard 2.0 crank and cosworth rods and pistons and working on the basis that the head and block are standard. What would the compression ratio be approximately? Im looking around 8 to one approximately of possible. What would be a good piston/rod set up for that compression ratio if that combination won't get that approximate ratio. Not building a big dollar motor but would like a solid bottom end. By the time I add arp bolts to my standard rods and have them resized I can get a set of new rods for similar price but lc pistons are the issue as most I'm seeing are for cosworth. Im in Australia
Bookmarks