Turbo ID and position ????

[ianmexico]

Need some help got this turbo and been told its a t34 .can anyone let me know if it is and also the way it sits is obviously wrong but can the housing jst be spun round ? If so how is actuator located . Such a thicko when it comes to stuff like this lol thanx for any help in advance

[joe GSM]

basically you have a t34 front comp housing on a 2wd ex housing you need to spin it round and buy a actuator carrier bracket to suit. Unless you have a 4wd ex housing lying around which means you can just spin it round and it will fit

[ianmexico]

That's what I was hoping I'd hear . Got another old t3 lying about with actuator carrier bracket on it so will use that and spin it down . Thanx very much for info joe

[ianmexico]

Would it be okay sitting like this joe? Not sure if actuator rod has to sit in line with the other end fixing or if at an angle is ok

[joe GSM]

as long as wastegate opens freely its ok but if its restricted can over boost and jam the wastegate

[ianmexico]

Will give that a check cheers again for info mate