excellent shit m8,cant wait![]()
Glad to hear it Puddyi would also like to see this car in the flesh
![]()
tommy 2000
when its done we will have to for a big sideways wheel spinning thrash m8,while there both on the road together for once m8.fookin cosworths who'd have a![]()
Thats great news mate, will look forward to seeing it![]()
great news, i love this car, infact i ment to ask but i forgot, do you mind that ive stuck some pics of it in a magazine i had to make for my ict coursework?
cool as mate well done![]()
Wanted: Second Hand Tremec TKO 500, 600 or T56 Gearbox... Cash Waiting
Any small welding, fabrication, engineering, paint or mechanical works undertaken, please PM for details.
It would seem my computer skills are not good enough !!
thanks Guys !
Wanted: Second Hand Tremec TKO 500, 600 or T56 Gearbox... Cash Waiting
Any small welding, fabrication, engineering, paint or mechanical works undertaken, please PM for details.
It would seem my computer skills are not good enough !!
thanks Guys !
Well the block and pistons are done
But the head is fooked
Gonna take some more time at ikes .
puddy![]()
gutted at least the bottom end is done m8,hope its soon tho,anyway this summer is finished so next year now.thats what has happened to mine i think![]()
Me tooThe only problem here is the head is bloody dear for a decent one unless he is getting mates rates?
![]()
Puddy, I have been on this site for about 4 years and think I have only heard of you car being roadworthy for about 1 week.![]()
Seriously, glad it is on the mend
Look forward to seeing this car back out again.
I'd be suprised if it was a fault of the mapping that caused it to melt though if you took it to Harvey ? LOADS of other things could of caused it and him and Ahmed are more than capable of mapping any yb.
What was the score with the head ? where did that come from ?
I am getting it re- mapped when its up and running again so we
will find out then about the original "dyno session"
The head was done to "grp a big port" spec by a certain
tuner who used to sell "total seal rings" in dagenham .
I paid a lot of money to get it done and ike has texted me
tonight to tell me its down 25% on one of his heads on his
own flow bench !
Well fooked off
puddy![]()
Hey Puddy,
Was looking through some old car magazines this evening - I came across FAST CAR March 1992 Edition.
Is that your car on the front?? Turbo'ed Mk2 Cortina 4.9sec 0-60mph
Haven't been on here for a year or so but i rememeber some of your posts from ages ago.
Well its been a while but finally the head is almost done,the 200 block is now at the machine shop to have new standard bore liners fitted,I have a very modified 2wd inlet manifold and proper 70 mm throttle body,and the DTA s 60 pro ecu is in stock ready to be fitted !
puddy![]()
Good luck with the engine puddy keep it up i just luv your car and the work you have put into it over the years![]()
I have a new DTA S80 pro in stock if its any good to you puddy![]()
Sierra cosworth turbo race car
QMN saloon car championship
RETRO Motorsport
Its one I bought for the V6tt and it has never been used so the whole lot, inc plugs is new. Would need to get enough for it so I could buy a simpler ecu with a bit of change otherwise i might as well use it.
Be a shame to waste all of its features running an N/A 4 pot though.
Good luck with the engine BTW![]()
Sierra cosworth turbo race car
QMN saloon car championship
RETRO Motorsport
cant wait to see this back on the road, one of my favorite osf everkeep up the good work
![]()
Fingers crossed for you Puddy - an awesome car, very well knows and it would be great to get to see it once it's back on the road![]()
Well the inlet manifold is done !
And the block has had the new liners fitted, just waiting for
some o/s bearings and my wrc head gasket to turn up now,
and then the build will commence
puddy![]()
Top stuff mate![]()
looks great, cant wait to see this car back together![]()
Niceone carnt wait to see it built up again![]()
Screaming 1300 mexico rep
That manifold is a work of art.![]()
that manifold is sweet... is it all custom made of is the throttle bodie bought?
nice whatever
what sort of power you hoping for this time puddy?
Wanted: Second Hand Tremec TKO 500, 600 or T56 Gearbox... Cash Waiting
Any small welding, fabrication, engineering, paint or mechanical works undertaken, please PM for details.
It would seem my computer skills are not good enough !!
thanks Guys !
Glad to see its comming along , hope the builds goes well![]()
Good luck with it Mark, And hope you get a bit more luck with it this time round...
Looking good mate
Old skool forever
Just don`t tell the wife
how much it really costs!
you have been spending lots![]()
9.7 @ 143 mph http://www.youtube.com/watch?v=kF1Ep...feature=relmfu
Cheers lads , manifold is a flowed and much modified stock
2wd inlet, with a jap aftermarket proper 70mm t/b.
Can't wait to bolt the motor back together though and get it
back in the hole !
pics to follow as soon as
puddy![]()
Glad to see it moving along mate![]()
be good to see you back out and about
Bookmarks