oops i meant 257mm
i know this is gonna be a really stupid question buit if i machine 2.5mm off of the mounting face, wouldnt that make it closer??
thanks
oops i meant 257mm
i know this is gonna be a really stupid question buit if i machine 2.5mm off of the mounting face, wouldnt that make it closer??
thanks
No it makes it move further outboard as it bolts up from the back of the huboops i meant 257mm
i know this is gonna be a really stupid question buit if i machine 2.5mm off of the mounting face, wouldnt that make it closer??
thanks
BTW
Mine are fitted and running on my tracky using the princess 4 pots and they are a massive improvement over the 247mm capri veted setup
got mine on today (THANKS mark!!!!). Had to stomp on the brakes hard on the way home and they felt better, even though they are not bedded in yet.
wat is the goin price of a pair of BMW E30 Disc?
i paid £40 the pair, you can get em cheaper though.
was jus asking my sis is in paris and is coming home on the 14th.
Do u guys know of anyplace in france that sells em?
Nicve post but i cant read the bloody red writing
Well sit nearer to the monitor then!Nicve post but i cant read the bloody red writing
It took me ages to do all that when I was pissed one night, I aint doing it again
LMAO i got a 21 inch screen best get my specs out would it be better if i was pissewd all so when reading it
LOL
So have I got a 21" monitor, and I can see it just fine
Yes try after a few beers and see if it gets clearer
Or play with the colour settings
So now the front is organised..what would be the better setup for the back:
Peugeot 205 rotors and citreon bx calipers
Sierra rotors and citreon bx calipers.
Whats wrong with Wilwood's ? They are 110 pounds each and will bolt straght on ?
For the rear: I hear a lot of people mounting XR3i discs and Siera 4x4 rear calippers.
Also complete kits available at http://www.caprisport.com
Allmost forgot,
They place the disc (rotor) further outside to feed the heath to the wheel instead of the bearing.
Does it make sense to do so ? You need to machine the hub and weaken it on it's most important place.
Some examples:
Weird, This should alter the offset ?
Just a bit taken off the outside and lugs for old disc removed. Doesn't really weaken itOriginally Posted by Jeroen
I have seen some swede do volvon 4pot conversion with sierra v6 disk mounted on the outside of the hub like caprisports conversions.
Volvo 4pots have bigger brake pads than princess and larger pistons
Bookmarks