LSD Fitment

**Kel** · 08-10-2004, 12:04

anyone here know of anyone who could :-

remove my 3.54 diff from car, remove CW

Take Carrier that I have with a loaded the LSD with a 4.4 CW swap the CW over re fit. So I end up with my LSD with my 3.54.

Could do it myself but its the backlash & mesh setup I'm worried about.

**cossymax** · 08-10-2004, 12:11

JW engineering in Erith barnhurst road will do it might even do it will you wait,speak to glen 01322556554 or 01322559852 they will do it properly and cheaper for cash

dont take my lsd though lol as mine is there

**Kel** · 08-10-2004, 12:32

mines a atb, could it get mixed up !!!

**Retromotorsport** · 08-10-2004, 12:49

Salisbury Transmissions, he only does diffs, call Dean on 07949 835260.

**cossymax** · 08-10-2004, 12:59

so is mine lol

**2quick4u** · 08-10-2004, 18:39

Salisbury Transmissions, he only does diffs, call Dean on 07949 835260.

Reccomended diff man for me

**Clint** · 08-10-2004, 19:35

BHG in Cranbrook are considered to be the best in the business, but a bit far out

Details:
BGH Geartech Red Roofs New Road Cranbrook Kent TN17 3LE 01580 714114

**Kevmk2** · 09-10-2004, 13:34

Or you could try Ron at H.T racing,he done my diff and set it up fine,pity you didnt get a tran x one instead of quaife ATB they have a tendency to spin one wheel under hard cornering and unless you have got big power they dont donut very well,for example i had a quaife lsd in my escort when i had english axle,it worked fine with the ht engine,when i sold the diff to my mate with midly tuned pinto it kept spinning one wheel especially when doing a donut. Just my 2p worth

**Kel** · 10-10-2004, 08:59

The Engine that is planned to be fitted was qouted to produce 175 at the flywheel. I'm not looking to donut, the diff I have was used in the car our engine came from.