Alloy Diff-Brace kit

[FOSSIE]

I've managed to put together a batch of these alloy diff brace kits to fit Atlas axles. They bolt across the back face of the diff housing, and clamp to the axle tubes - providing 2 main functions - stopping the tubes from bending (relative to the diff housing) and also stop the tubes from pulling free from the diff housing (you'll notice the standard capri tubes are held in by 1 puddle weld)

They also add about 20bhp to you car's power output since they look so cool.

Very simple to fit - and suitable for either standard (capri) tubed casings, or a re-tubed (thick tube) casing - please state which you need as the clamps are different sizes.

The kit consists of what you see in the picture - brace plate, clamps, nuts, bolts, gaskets etc - basically everything you need to do the job.

Trust me when i say this is top quality stuff! The brace plate is proper, high strength structural alloy (which a lot of other kits aren't) and is precision made... very

These have an RRP of £100 + VAT, and would be £12 to deliver.

This batch only, will be £100 delivered for the full kit (there's no VAT to add yet, but there will be soon, so hurry!)

Please allow 2 weeks for delivery, as they take sodding ages to make

Here's a picture of the kit - i'll post a picture of one fitted next time i, err, fit one.

[PIG]

do you do the alloy back diff cover for an atlas bud,without a watts linkage

[FOSSIE]

No mate, i don't, sorry. I looked into it, but one of the Capri owners clubs already do them and i couldn't match their price. However, if you insist on buying from me, i do have a very nice milling machine which could always be used to remove said watts linkage quadrant! (seriously, it'd be cheaper to speak to the Capri people.) By the way, what do you want one of them for?