Cosworth Parts For Sale

Collapse
X
Collapse
  •  

  • Cosworth Parts For Sale

    Hi all,

    Cosworth parts for sale all in good working order.

    2 x Cosworth PF01 Throttle Position Sensors 1 black 1 red £25 each -SOLD

    T3-T34 Turbo Damper Clamp £20 (not the turbo damper but the part that is bolted to the turbo)
    Click image for larger version

Name:	IMG_0414.JPG
Views:	2
Size:	142.4 KB
ID:	2300529

    Cosworth 2wd Motorsport Developements -31 Wastegate Actuator - couple of years old unused £50
    Cosworth 2wd Motorsport Developements -34 Wastegate Actuator - 2 months old 200 miles use. £50
    Click image for larger version

Name:	IMG_0405.JPG
Views:	2
Size:	143.6 KB
ID:	2300530

    Stainless Steel Coil Cover £15
    Click image for larger version

Name:	IMG_0401.JPG
Views:	2
Size:	145.9 KB
ID:	2300531

    Standard 2wd Bosch Dump Valve & Hose £30
    Click image for larger version

Name:	IMG_0406.JPG
Views:	2
Size:	143.4 KB
ID:	2300532

    Standard 2wd Airbox £70
    Click image for larger version

Name:	IMG_0399.JPG
Views:	2
Size:	143.5 KB
ID:	2300535

    Stainless Turbo Water Pipes, think these are off of an escort cosworth, came with a turbo i bought a few years ago £25
    Click image for larger version

Name:	IMG_0402.JPG
Views:	2
Size:	143.4 KB
ID:	2300536

    2 New Quaife Pegged Vernier Pulleys - bought in feb never used £110
    Click image for larger version

Name:	CIMG0878.JPG
Views:	2
Size:	137.1 KB
ID:	2300537Click image for larger version

Name:	IMG_0413.JPG
Views:	2
Size:	143.5 KB
ID:	2300538

    Working L6 ECU - removed from my car due to upgrade £50 -Sold


    Ahmed Bayjoo L6 330bhp Chip & A Set Of 4 Dark Green 803 Injectors - came off my car a few years ago due to upgrade, chip is for 2wd std compression, 803 dark green injectors, T3 Turbo, 3 bar map sensor, large intercooler, make sure fuelling is correct and must use vpower or equivalent 97 RON or higher petrol with it. £150
    Click image for larger version

Name:	IMG_0404.JPG
Views:	2
Size:	145.4 KB
ID:	2300540Click image for larger version

Name:	IMG_0403.JPG
Views:	2
Size:	145.5 KB
ID:	2300541

    T34 .63 Exhaust Housing £170
    Click image for larger version

Name:	IMG_0408.JPG
Views:	2
Size:	143.3 KB
ID:	2300542Click image for larger version

Name:	IMG_0409.JPG
Views:	2
Size:	145.7 KB
ID:	2300543Click image for larger version

Name:	IMG_0411.JPG
Views:	2
Size:	143.9 KB
ID:	2300544Click image for larger version

Name:	IMG_0412.JPG
Views:	2
Size:	141.3 KB
ID:	2300545

    T3 Wastegate Actuator Bracket £10
    Oil Pressure Adapter £10 Each - pressure switch might not work.
    Click image for larger version

Name:	IMG_0416.JPG
Views:	2
Size:	142.0 KB
ID:	2300546

    All items plus postage and open to sensibile offers.
    Cheers
    Attached Files
      Posting comments is disabled.

    Categories

    Collapse

    article_tags

    Collapse

    Latest Articles

    Collapse

    • Does anyone ever tried Kent HT1E camshaft
      by madmaxptt
      I am building a 2,3 pinto with twin dcoe 45s.

      I think for my setup the HT1e with Gp1 BvH is better

      what is your advice???
      27-03-2024, 11:52
    • Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.
      by Zakspak
      Break pedal box back on the bench for fitting the break light switch and setting the pedals up.
      I stripped the switch and cleaned it, then cut down the threaded section and the switch plunger.




      The pedals have been cleaned and the little surface rust removed and freshen up with a coat of gloss black
      The white line is a datum for the neutral position

      Output pipes fitted using copper sealing washers before fitting
      ...
      09-08-2023, 16:39
    • Re: xflow oil pickup problem
      by ante1970
      Ok boy. Thank's at all. Today, with help of my father in law have finished " modification with hammer" of oil pickup and make little space for conrod bolt ! Post some pics of work ! Another time thank 's HonkyWhiteTrash and Daniele....
      08-05-2023, 19:15
    • Cosworth Head
      by MO1
      Wanted
      Good usable SIERRA Cosworth 16V head complete or minus valves. But must have cam caps. Cheers
      27-04-2020, 20:23
    • Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.
      by Zakspak
      On to the centre sections. New metal on to new metal. Nice ! I welded extra plates in where the jacking point is to increase its strength, hopefully to stop it becoming dented when on stands or jacking. I over laid the new sections against the originals to check alignment, and marked them for drilling the plug weld holes. Again insides where painted with the gloss black. I marked where the originals where and removed them. Due to the replacement floor it was just a matter of un-bolting th...
      21-02-2019, 16:26
    • Fitting radiators
      by markb
      Ryou should be abel to reduce the size by editing them in paint or similar.. to post them upload them using the link at the top of the page and copy the test it gives you into a post ...
      29-05-2017, 16:30
    Working...