STOLEN! White 3dr Cosworth C232HVW, Bexleyheath area 23/09/16 STOLEN!

Collapse
X
Collapse
  •  

  • STOLEN! White 3dr Cosworth C232HVW, Bexleyheath area 23/09/16 STOLEN!

    [ATTACH=CONFIG]79500[/ATTACH]

    White 3 door Cosworth registration number C232HVW was stolen from the owners driveway in Barneshurst near Bexleyheath between 9pm & midnight on Friday 23rd September 2016.
    The car is an ex press car & was a project which had been off the road for over 10 years.
    The Cossie is completely standard & has rust on the driver’s side front wing, A post, tailgate & driver’s door, plus other areas.

    The car was trailered away using a Ssangyong Rexton reg FJ54BVW which was seen travelling on the M2 motorway at 7:30am near Gravesend heading towards Canterbury with the Cosworth on a trailer with no wheel on the driver’s side front, all the wheels were on it when it was taken.


    There is a reward for information leading to the safe return of this car. Anyone with info can contact the owner Matt Goodrich on 07961 836286
    Tags: None
        Posting comments is disabled.

      Categories

      Collapse

      article_tags

      Collapse

      Latest Articles

      Collapse
      • Does anyone ever tried Kent HT1E camshaft
        by madmaxptt
        I am building a 2,3 pinto with twin dcoe 45s.

        I think for my setup the HT1e with Gp1 BvH is better

        what is your advice???
        27-03-2024, 11:52
      • Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.
        by Zakspak
        Break pedal box back on the bench for fitting the break light switch and setting the pedals up.
        I stripped the switch and cleaned it, then cut down the threaded section and the switch plunger.




        The pedals have been cleaned and the little surface rust removed and freshen up with a coat of gloss black
        The white line is a datum for the neutral position

        Output pipes fitted using copper sealing washers before fitting
        ...
        09-08-2023, 16:39
      • Re: xflow oil pickup problem
        by ante1970
        Ok boy. Thank's at all. Today, with help of my father in law have finished " modification with hammer" of oil pickup and make little space for conrod bolt ! Post some pics of work ! Another time thank 's HonkyWhiteTrash and Daniele....
        08-05-2023, 19:15
      • Cosworth Head
        by MO1
        Wanted
        Good usable SIERRA Cosworth 16V head complete or minus valves. But must have cam caps. Cheers
        27-04-2020, 20:23
      • Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.
        by Zakspak
        On to the centre sections. New metal on to new metal. Nice ! I welded extra plates in where the jacking point is to increase its strength, hopefully to stop it becoming dented when on stands or jacking. I over laid the new sections against the originals to check alignment, and marked them for drilling the plug weld holes. Again insides where painted with the gloss black. I marked where the originals where and removed them. Due to the replacement floor it was just a matter of un-bolting th...
        21-02-2019, 16:26
      • Fitting radiators
        by markb
        Ryou should be abel to reduce the size by editing them in paint or similar.. to post them upload them using the link at the top of the page and copy the test it gives you into a post ...
        29-05-2017, 16:30
      View All
      Working...