Tweet
Howdy,
My car is set up to run in Improved Production, here in OZ,
Which allows limited modifications to these rules.
Older Specs.
It has a pinto, german 2 liter head,T 10 block. 38 & 43mm valves, twin 45s, 38 chokes, TRW 11.5 pistons, head planed to get 12.4:1. That put out 180 on engine dyno and 130 Rear wheel HP on chassis dyno. [depending on who u believe]
1600 cc strutts with adjust height. 420 lb springs, 22 mm front bar, 3.5 of neg, 5 of castor. Capri competition wet strut inserts. Capri 2.8I rotors Volvo 4 piston calipers, DS 3000 pads. No booster. 13/16" master cylinder.
English axel with 4.44, clutch plate diff. 16mm rear bar. Koni shocks there. 125 lb springs. No traction bars.
4 speeder with SC/CR 2.39 first gear set. Rose quick shifter.
Couple o sets of wheels. 2 sets of 13 x 7 old A008rs on one,
A032s on other and a set 13 x 7/8 with F2/3 slicks on them, a s they become available.
Currently same engine, with better? head. Different manifold. Same carbs
4.5 degrees neg 7 degrees of castor.
Capri struts, koni RX7 inserts, volvo 4 spots, BMW rotors.
More modificattions as I get to them and money is available.
Some pics and vids.
Vids
Dial up friendly 982kb.
Right click and save....
Better Qu.... 3.2mb.
right click and save.....
Couple of vids Pit crew took.
rm-7-05-pitwl.wmv
rm-7-05-mitpit-1.wmv
Some off site pics of Car, Bits and related popcorn:
My car is set up to run in Improved Production, here in OZ,
Which allows limited modifications to these rules.
Older Specs.
It has a pinto, german 2 liter head,T 10 block. 38 & 43mm valves, twin 45s, 38 chokes, TRW 11.5 pistons, head planed to get 12.4:1. That put out 180 on engine dyno and 130 Rear wheel HP on chassis dyno. [depending on who u believe]
1600 cc strutts with adjust height. 420 lb springs, 22 mm front bar, 3.5 of neg, 5 of castor. Capri competition wet strut inserts. Capri 2.8I rotors Volvo 4 piston calipers, DS 3000 pads. No booster. 13/16" master cylinder.
English axel with 4.44, clutch plate diff. 16mm rear bar. Koni shocks there. 125 lb springs. No traction bars.
4 speeder with SC/CR 2.39 first gear set. Rose quick shifter.
Couple o sets of wheels. 2 sets of 13 x 7 old A008rs on one,
A032s on other and a set 13 x 7/8 with F2/3 slicks on them, a s they become available.
Currently same engine, with better? head. Different manifold. Same carbs
4.5 degrees neg 7 degrees of castor.
Capri struts, koni RX7 inserts, volvo 4 spots, BMW rotors.
More modificattions as I get to them and money is available.
Some pics and vids.
Vids
Dial up friendly 982kb.
Right click and save....
Better Qu.... 3.2mb.
right click and save.....
Couple of vids Pit crew took.
rm-7-05-pitwl.wmv
rm-7-05-mitpit-1.wmv
Some off site pics of Car, Bits and related popcorn:
Gary
go on the pinto !!! 
Are the rear arches in this pic mk1 mex front flares? What size wheels will fit? That's what I'm thinking of doing with mine,any more pics of this?
Comment