andy's group4 xe powered chevette rebuild

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • chevetteandy
    Tyre Kicker
    • Sep 2007
    • 30

    andy's group4 xe powered chevette rebuild

    this shell has been built with all new partsstarting with the shell is a 30'000 mile one owner .rebuilt to group 4 vauxhall spec. full weld in cage from roll centre down south. big trans tunnel with diff tunnel and exhaust tunnel .group4 dash.polly windows and heated front screen. bias pedal box. 320mm discs with ap cp5000 calipers. 235bhp at the wheels all steel xe on jenvey tb and dta management all set up via track and road steve greenald. full stainless system made and fitted by jp exhausts in maclesfield.ford type 5 straight cut dog box used in the tvr tuscans from glebe transmissions in stokeand using a twin plate paddle clutch with a concentric clutch.4 linked atlas big tubed axle with large shafts and gears with 5:1 and lsd with disc brake to rear. running compomotive 15x8 wheels with dunlop cr311 slicks.
    cheers andy

  • Graham
    TURBOSPORT SPONSOR
    Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    • Feb 2006
    • 25214

    #2
    Re: andy's group4 xe powered chevette rebuild

    sounds great can we have some pics???????
    sigpic
    https://www.facebook.com/penguinmotorslimited?ref=hl

    Comment

    • chevetteandy
      Tyre Kicker
      • Sep 2007
      • 30

      #3
      Re: andy's group4 xe powered chevette rebuild


      i will have some fully built pics on the site very soon . cheers andy
      the car is now road legal come on !!!!!!
      cheers andy

      Comment

      Working...