Welcome to Turbosport

Collapse

vBulletin 4.0 Publishing Suite with CMS

  •  
  • Time
  • Show
Clear All
new posts

  • RS1600 interior

    RS1600 interior

    I don't have full list off Items yet, but will post over weekend. If I your email address will post the pictures with a appox price Please don't make any offers until I have chance to list pictures and prices. James I have the interior of a RS1600 that is from a perfect example that was converted to a race car , seats front and rear heater consul (compete) switch's cables etc wiring loom washer bottle and foot pump oil filter/hosing servo carpets heater matrix and a bunch or other stuff all in ...
    Go to post

  • Cosworth Head

    Cosworth Head

    Wanted
    Good usable SIERRA Cosworth 16V head complete or minus valves. But must have cam caps. Cheers
    Go to post

  • Re: TJ Motorsport SPECIAL OFFERS

    Re: TJ Motorsport SPECIAL OFFERS

    Forgot to add the picture of the full floor:

    ...
    Go to post

  • Does anyone ever tried Kent HT1E camshaft

    Does anyone ever tried Kent HT1E camshaft

    I am building a 2,3 pinto with twin dcoe 45s.

    I think for my setup the HT1e with Gp1 BvH is better

    what is your advice???
    Go to post

  • US, CANADA, Da Islands man and South America

    US, CANADA, Da Islands man and South America

    I would like to suggest a section called "US Canada Da Islands man and South America" be included
    Reason is simple: Buy Sell, swap, shipping and share information events and local supply of resources in these cars with people close(r) to the Left side of the Globe
    Please discuss and consider
    Thanks
    James

    California
    Go to post

  • Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.

    Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.

    Break pedal box back on the bench for fitting the break light switch and setting the pedals up.
    I stripped the switch and cleaned it, then cut down the threaded section and the switch plunger.




    The pedals have been cleaned and the little surface rust removed and freshen up with a coat of gloss black
    The white line is a datum for the neutral position

    Output pipes fitted using copper sealing washers before fitting
    ...
    Go to post

  • Cosworth Parts For Sale

    Cosworth Parts For Sale

    Hi all,

    Cosworth parts for sale all in good working order.

    2 x Cosworth PF01 Throttle Position Sensors 1 black 1 red £25 each -SOLD

    T3-T34 Turbo Damper Clamp £20 (not the turbo damper but the part that is bolted to the turbo)


    Cosworth 2wd Motorsport Developements -31 Wastegate Actuator - couple of years old unused £50
    Cosworth 2wd Motorsport Developements -34 Wastegate Actuator - 2 months old 200 miles use. £50
    Stainles...
    Go to post

  • Re: xflow oil pickup problem

    Re: xflow oil pickup problem

    Ok boy. Thank's at all. Today, with help of my father in law have finished " modification with hammer" of oil pickup and make little space for conrod bolt ! Post some pics of work ! Another time thank 's HonkyWhiteTrash and Daniele....
    Go to post

  • Mk 1 Escort Retangular head lights LHD Wanted

    Mk 1 Escort Retangular head lights LHD Wanted

    Anyone get a set for a LHD car?
    Please send Pic and price
    James

    jamesjordan@homail.com
    Go to post

  • Re: Measurment needed. ZF tunnel tower in MK1 Escort

    Re: Measurment needed. ZF tunnel tower in MK1 Escort

    Attached is a few pictures and pdf with sizes on the ZF S5-18/3 box i want to fit. If i can get a measurement from the rear seat crossbrace to the center of the gear leaver position, i wil be able to finish the metal work on the cuttout to fit the Gartrac ZF tower.
    Any help is appreciated...
    Go to post
There are no articles in this category.
 
  • Time
  • Show
Clear All
new posts
Please log in to your account to view your subscribed posts.

Categories

Collapse

article_tags

Collapse

Latest Articles

Collapse

  • Does anyone ever tried Kent HT1E camshaft
    by madmaxptt
    I am building a 2,3 pinto with twin dcoe 45s.

    I think for my setup the HT1e with Gp1 BvH is better

    what is your advice???
    27-03-2024, 11:52
  • Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.
    by Zakspak
    Break pedal box back on the bench for fitting the break light switch and setting the pedals up.
    I stripped the switch and cleaned it, then cut down the threaded section and the switch plunger.




    The pedals have been cleaned and the little surface rust removed and freshen up with a coat of gloss black
    The white line is a datum for the neutral position

    Output pipes fitted using copper sealing washers before fitting
    ...
    09-08-2023, 16:39
  • Re: xflow oil pickup problem
    by ante1970
    Ok boy. Thank's at all. Today, with help of my father in law have finished " modification with hammer" of oil pickup and make little space for conrod bolt ! Post some pics of work ! Another time thank 's HonkyWhiteTrash and Daniele....
    08-05-2023, 19:15
  • Cosworth Head
    by MO1
    Wanted
    Good usable SIERRA Cosworth 16V head complete or minus valves. But must have cam caps. Cheers
    27-04-2020, 20:23
  • Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.
    by Zakspak
    On to the centre sections. New metal on to new metal. Nice ! I welded extra plates in where the jacking point is to increase its strength, hopefully to stop it becoming dented when on stands or jacking. I over laid the new sections against the originals to check alignment, and marked them for drilling the plug weld holes. Again insides where painted with the gloss black. I marked where the originals where and removed them. Due to the replacement floor it was just a matter of un-bolting th...
    21-02-2019, 16:26
  • Fitting radiators
    by markb
    Ryou should be abel to reduce the size by editing them in paint or similar.. to post them upload them using the link at the top of the page and copy the test it gives you into a post ...
    29-05-2017, 16:30
Working...