Not a Ford

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ken Welch
    Tyre Kicker
    • Jul 2008
    • 47

    #76
    Re: Not a Ford

    Thanks Graham it was very enjoyable. I can say that I saw your car from every possible angle. Well done.

    Comment

    • Ken Welch
      Tyre Kicker
      • Jul 2008
      • 47

      #77
      Re: Not a Ford

      Hi Ant.

      My battery is inside the car on the floor in the rear passenger footwell by the near side rear wheel.

      Ok Ride Height. On a mini the ride height is measured from the ground to the flange on the sill. At the front I run mine at 180mm, that is from the ground to the sill flange or lip. The problem with running low is the front damper tend to close up on bump. So you have to raise the top damper mount. You can buy these, but you will be able to make some or modify your existing ones. At the rear I run 200mm from the ground to the sill flange. The back needs to be 20 to 25mm higher than the front. Dont run to low on the road because the sump can get very low to the ground. I would recommend 210mm at the front and 235mm at the rear. If you remove the rear valance a few holes in the rear subframe bar will be OK, but don't go mad and Graham is right you could weaken it. If you need any info about your mini I will be pleased to help.

      Comment

      • angliaant
        Pit Crew
        Decade Plus User
        • Dec 2006
        • 1841

        #78
        Re: Not a Ford

        alright thanks ken, thats brill, ill have a measure of mine later, although i really need some wheels before i can do anything about lowering it
        yeah i reckon my rear valence will be coming off then and just a couple of swaged holes in the subframe, by swaging them i probably wont take any strength away i wont be taking people in the back anyway

        RE battery.... alright cool, think i might just leave mine where it is and repair the boot floor, cos if i put a fibreglass one in then i gotta try and find a new home of the battery

        thanks ken and graham ,i really appreciate you help
        Wanted: Second Hand Tremec TKO 500, 600 or T56 Gearbox... Cash Waiting
        Any small welding, fabrication, engineering, paint or mechanical works undertaken, please PM for details.

        It would seem my computer skills are not good enough !!

        thanks Guys !

        Comment

        • Ken Welch
          Tyre Kicker
          • Jul 2008
          • 47

          #79
          Re: Not a Ford

          I was not at the Brands DMN last weekend because Gerald and I went to Spa Francorchamp to race in the BCT. There was 68 car in the race comprising of Minis, NSUs and Fiat Arbaths. What a fantastic circuit a lot of it was flat out in top, Eau Rouge definately gets full attention. I had a puncture in the OSF tyre in qualifing after two laps and had a ride back on a lorry. Gerald won both races, I was third overall in the first race and a second overall in the last race. Lap times 3 minutes 04. Lydden is going to seem very short at 47 secs.
          Attached Files
          Last edited by Ken Welch; 05-06-2009, 17:57.

          Comment

          • david_white
            Pole Position
            Decade Plus User
            • Nov 2004
            • 4831

            #80
            Re: Not a Ford

            Well done ken Great result.

            Any more pics?

            Sierra cosworth turbo race car
            QMN saloon car championship

            RETRO Motorsport

            Comment

            • angliaant
              Pit Crew
              Decade Plus User
              • Dec 2006
              • 1841

              #81
              Re: Not a Ford

              yeah good stuff ken... your minis will rule the world

              yeah any more pics please
              Wanted: Second Hand Tremec TKO 500, 600 or T56 Gearbox... Cash Waiting
              Any small welding, fabrication, engineering, paint or mechanical works undertaken, please PM for details.

              It would seem my computer skills are not good enough !!

              thanks Guys !

              Comment

              • Ken Welch
                Tyre Kicker
                • Jul 2008
                • 47

                #82
                Re: Not a Ford

                After a lot of hard work by Leigh Dale and Chris from CS Coachworks the car is finally repaired and just in time for the final round of the British Car Trophy at the Nurburgring GP circuit this coming weekend.
                Attached Files

                Comment

                • david_white
                  Pole Position
                  Decade Plus User
                  • Nov 2004
                  • 4831

                  #83
                  Re: Not a Ford

                  Looks stunning Ken, good luck for your race

                  Sierra cosworth turbo race car
                  QMN saloon car championship

                  RETRO Motorsport

                  Comment

                  • angliaant
                    Pit Crew
                    Decade Plus User
                    • Dec 2006
                    • 1841

                    #84
                    Re: Not a Ford

                    that looks really luverly ken, yeah good luck with the race
                    Wanted: Second Hand Tremec TKO 500, 600 or T56 Gearbox... Cash Waiting
                    Any small welding, fabrication, engineering, paint or mechanical works undertaken, please PM for details.

                    It would seem my computer skills are not good enough !!

                    thanks Guys !

                    Comment

                    Working...