...
vBulletin 4.0 Publishing Suite with CMS
-
Does anyone ever tried Kent HT1E camshaft
-
Created by:
madmaxptt
Does anyone ever tried Kent HT1E camshaft
I am building a 2,3 pinto with twin dcoe 45s.
I think for my setup the HT1e with Gp1 BvH is better
what is your advice??? -
Created by:
-
US, CANADA, Da Islands man and South America
I would like to suggest a section called "US Canada Da Islands man and South America" be included
Reason is simple: Buy Sell, swap, shipping and share information events and local supply of resources in these cars with people close(r) to the Left side of the Globe
Please discuss and consider
Thanks
James
California -
Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.
Break pedal box back on the bench for fitting the break light switch and setting the pedals up.
I stripped the switch and cleaned it, then cut down the threaded section and the switch plunger.
The pedals have been cleaned and the little surface rust removed and freshen up with a coat of gloss black
The white line is a datum for the neutral position
Output pipes fitted using copper sealing washers before fitting
... -
Cosworth Parts For Sale
-
Created by:
kvmic
Cosworth Parts For Sale
Hi all,
Cosworth parts for sale all in good working order.
2 x Cosworth PF01 Throttle Position Sensors 1 black 1 red £25 each -SOLD
T3-T34 Turbo Damper Clamp £20 (not the turbo damper but the part that is bolted to the turbo)
Cosworth 2wd Motorsport Developements -31 Wastegate Actuator - couple of years old unused £50
Cosworth 2wd Motorsport Developements -34 Wastegate Actuator - 2 months old 200 miles use. £50
Stainless S... -
Created by:
-
Re: xflow oil pickup problem
-
Created by:
ante1970
Re: xflow oil pickup problem
Ok boy. Thank's at all. Today, with help of my father in law have finished " modification with hammer" of oil pickup and make little space for conrod bolt ! Post some pics of work ! Another time thank 's HonkyWhiteTrash and Daniele....
-
Created by:
-
Mk 1 Escort Retangular head lights LHD Wanted
-
Re: Measurment needed. ZF tunnel tower in MK1 Escort
Attached is a few pictures and pdf with sizes on the ZF S5-18/3 box i want to fit. If i can get a measurement from the rear seat crossbrace to the center of the gear leaver position, i wil be able to finish the metal work on the cuttout to fit the Gartrac ZF tower.
Any help is appreciated... -
STOLEN! White 3dr Cosworth C232HVW, Bexleyheath area 23/09/16 STOLEN!
White 3 door Cosworth registration number C232HVW was stolen from the owners driveway in Barneshurst near Bexleyheath between 9pm & midnight on Friday 23rd September 2016. The car is an ex press car & was a project which had been off the road for over 10 years. The Cossie is completely standard & has rust on the driver’s side front wing, A post, tailgate & driver’s door, plus other areas. The car was trailered away using a Ssangyong Rexton reg FJ54BVW which was seen travelli...
There are no articles in this category.
Please log in to your account to view your subscribed posts.