Hi all,
Cosworth parts for sale all in good working order.
2 x Cosworth PF01 Throttle Position Sensors 1 black 1 red £25 each -SOLD
T3-T34 Turbo Damper Clamp £20 (not the turbo damper but the part that is bolted to the turbo)
Cosworth 2wd Motorsport Developements -31 Wastegate Actuator - couple of years old unused £50
Cosworth 2wd Motorsport Developements -34 Wastegate Actuator - 2 months old 200 miles use. £50
Stainles...
vBulletin 4.0 Publishing Suite with CMS
-
Cosworth Parts For Sale
- Created by: kvmic
- Published: 26-09-2024, 10:27
- 0 comments
Cosworth Parts For Sale
-
Re: xflow oil pickup problem
- Created by: ante1970
- Published: 26-09-2024, 10:27
- 0 comments
Re: xflow oil pickup problem
Ok boy. Thank's at all. Today, with help of my father in law have finished " modification with hammer" of oil pickup and make little space for conrod bolt ! Post some pics of work ! Another time thank 's HonkyWhiteTrash and Daniele.... -
Mk 1 Escort Retangular head lights LHD Wanted
- Created by: James Jordan
- Published: 26-09-2024, 10:27
- 0 comments
Mk 1 Escort Retangular head lights LHD Wanted
-
Re: Measurment needed. ZF tunnel tower in MK1 Escort
- Created by: James Jordan
- Published: 26-09-2024, 10:27
- 0 comments
Re: Measurment needed. ZF tunnel tower in MK1 Escort
Attached is a few pictures and pdf with sizes on the ZF S5-18/3 box i want to fit. If i can get a measurement from the rear seat crossbrace to the center of the gear leaver position, i wil be able to finish the metal work on the cuttout to fit the Gartrac ZF tower.
Any help is appreciated... -
STOLEN! White 3dr Cosworth C232HVW, Bexleyheath area 23/09/16 STOLEN!
- Created by: escortmad79
- Published: 26-09-2024, 10:27
- 0 comments
STOLEN! White 3dr Cosworth C232HVW, Bexleyheath area 23/09/16 STOLEN!
White 3 door Cosworth registration number C232HVW was stolen from the owners driveway in Barneshurst near Bexleyheath between 9pm & midnight on Friday 23rd September 2016. The car is an ex press car & was a project which had been off the road for over 10 years. The Cossie is completely standard & has rust on the driver’s side front wing, A post, tailgate & driver’s door, plus other areas. The car was trailered away using a Ssangyong Rexton reg FJ54BVW which was seen travelli... -
"Keep her stoked"
- Created by: Dave
- Published: 26-09-2024, 10:27
- 0 comments
"Keep her stoked"
It's the time of year when we are busy spreading straw in our strawberry rows. This year with the weather we have had it has been too wet a lot of the time, so when we get a week like we have just had we are flat out at it. We have a machine that pulls the bales apart so all we have to do is stand on the back and keep it loaded with bales. We cart the bales on a 4 wheel trailer, the sort with a turntable on the front. It is a very nice trailer as far as trailers go and has served us well. Can't... -
Fitting radiators
- Created by: markb
- Published: 26-09-2024, 10:27
- 0 comments
Fitting radiators
Ryou should be abel to reduce the size by editing them in paint or similar.. to post them upload them using the link at the top of the page and copy the test it gives you into a post ... -
Quaife 69G 6 speed Sequential Gearbox.
- Created by: FoMoCo
- Published: 26-09-2024, 10:27
- 0 comments
Quaife 69G 6 speed Sequential Gearbox.
Quaife 69g gearbox for sale.
Very little use, recent refurb.
Long stick and new potentiometer fitted.
Overs over 5k.
There are no articles in this category.
Please log in to your account to view your subscribed posts.
Categories
Collapse
article_tags
Collapse
Latest Articles
Collapse
-
by madmaxpttI am building a 2,3 pinto with twin dcoe 45s.
I think for my setup the HT1e with Gp1 BvH is better
what is your advice???-
Channel: Welcome to Turbosport
27-03-2024, 11:52 -
-
by ZakspakBreak pedal box back on the bench for fitting the break light switch and setting the pedals up.
I stripped the switch and cleaned it, then cut down the threaded section and the switch plunger.
The pedals have been cleaned and the little surface rust removed and freshen up with a coat of gloss black
The white line is a datum for the neutral position
Output pipes fitted using copper sealing washers before fitting
...-
Channel: Welcome to Turbosport
09-08-2023, 16:39 -
-
by ante1970Ok boy. Thank's at all. Today, with help of my father in law have finished " modification with hammer" of oil pickup and make little space for conrod bolt ! Post some pics of work ! Another time thank 's HonkyWhiteTrash and Daniele....
-
Channel: Welcome to Turbosport
08-05-2023, 19:15 -
-
by MO1Wanted
Good usable SIERRA Cosworth 16V head complete or minus valves. But must have cam caps. Cheers-
Channel: Welcome to Turbosport
27-04-2020, 20:23 -
-
by ZakspakOn to the centre sections. New metal on to new metal. Nice ! I welded extra plates in where the jacking point is to increase its strength, hopefully to stop it becoming dented when on stands or jacking. I over laid the new sections against the originals to check alignment, and marked them for drilling the plug weld holes. Again insides where painted with the gloss black. I marked where the originals where and removed them. Due to the replacement floor it was just a matter of un-bolting th...
-
Channel: Welcome to Turbosport
21-02-2019, 16:26 -
-
by markbRyou should be abel to reduce the size by editing them in paint or similar.. to post them upload them using the link at the top of the page and copy the test it gives you into a post ...
-
Channel: Welcome to Turbosport
29-05-2017, 16:30 -