Welcome to Turbosport

Collapse

vBulletin 4.0 Publishing Suite with CMS

  •  
  • Page of 4
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 template Next

  • Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.

    • Created by: Zakspak
    • Published: 26-09-2024, 10:27
    • 0 comments

    Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.

    Break pedal box back on the bench for fitting the break light switch and setting the pedals up.
    I stripped the switch and cleaned it, then cut down the threaded section and the switch plunger.




    The pedals have been cleaned and the little surface rust removed and freshen up with a coat of gloss black
    The white line is a datum for the neutral position

    Output pipes fitted using copper sealing washers before fitting
    ...
    Go to post

  • Cosworth Parts For Sale

    • Created by: kvmic
    • Published: 26-09-2024, 10:27
    • 0 comments

    Cosworth Parts For Sale

    Hi all,

    Cosworth parts for sale all in good working order.

    2 x Cosworth PF01 Throttle Position Sensors 1 black 1 red £25 each -SOLD

    T3-T34 Turbo Damper Clamp £20 (not the turbo damper but the part that is bolted to the turbo)


    Cosworth 2wd Motorsport Developements -31 Wastegate Actuator - couple of years old unused £50
    Cosworth 2wd Motorsport Developements -34 Wastegate Actuator - 2 months old 200 miles use. £50
    Stainles...
    Go to post

  • Re: xflow oil pickup problem

    • Created by: ante1970
    • Published: 26-09-2024, 10:27
    • 0 comments

    Re: xflow oil pickup problem

    Ok boy. Thank's at all. Today, with help of my father in law have finished " modification with hammer" of oil pickup and make little space for conrod bolt ! Post some pics of work ! Another time thank 's HonkyWhiteTrash and Daniele....
    Go to post

  • Mk 1 Escort Retangular head lights LHD Wanted

    • Created by: James Jordan
    • Published: 26-09-2024, 10:27
    • 0 comments

    Mk 1 Escort Retangular head lights LHD Wanted

    Anyone get a set for a LHD car?
    Please send Pic and price
    James

    jamesjordan@homail.com
    Go to post

  • Re: Measurment needed. ZF tunnel tower in MK1 Escort

    • Created by: James Jordan
    • Published: 26-09-2024, 10:27
    • 0 comments

    Re: Measurment needed. ZF tunnel tower in MK1 Escort

    Attached is a few pictures and pdf with sizes on the ZF S5-18/3 box i want to fit. If i can get a measurement from the rear seat crossbrace to the center of the gear leaver position, i wil be able to finish the metal work on the cuttout to fit the Gartrac ZF tower.
    Any help is appreciated...
    Go to post

  • STOLEN! White 3dr Cosworth C232HVW, Bexleyheath area 23/09/16 STOLEN!

    • Created by: escortmad79
    • Published: 26-09-2024, 10:27
    • 0 comments

    STOLEN! White 3dr Cosworth C232HVW, Bexleyheath area 23/09/16 STOLEN!



    White 3 door Cosworth registration number C232HVW was stolen from the owners driveway in Barneshurst near Bexleyheath between 9pm & midnight on Friday 23rd September 2016. The car is an ex press car & was a project which had been off the road for over 10 years. The Cossie is completely standard & has rust on the driver’s side front wing, A post, tailgate & driver’s door, plus other areas. The car was trailered away using a Ssangyong Rexton reg FJ54BVW which was seen travelli...
    Go to post

  • Re: NewGroup 4 Escort MK2 rolling shell

    • Created by: RZR1000
    • Published: 26-09-2024, 10:27
    • 0 comments

    Re: NewGroup 4 Escort MK2 rolling shell

    ...
    Go to post

  • Re: NewGroup 4 Escort MK2 rolling shell

    • Created by: RZR1000
    • Published: 26-09-2024, 10:27
    • 0 comments

    Re: NewGroup 4 Escort MK2 rolling shell

    ...
    Go to post

  • Head gaskets gone between 1 and 2 and worn away the block.. What are my options??

    • Created by: slatter
    • Published: 26-09-2024, 10:27
    • 0 comments

    Head gaskets gone between 1 and 2 and worn away the block.. What are my options??

    As title, found the reason my engine wasnt running right, some pics are below, what are my options?? I thought about skimming the block, but then i think the pistons will protude above the top of the block. Is there anything i can do? Or do i need a new block??


    Thanks james

    ...
    Go to post
    Last edited by Clint; 27-09-2024, 03:32.

  • Jenvey 48mm x 118mm DCOE throttle bodies!

    • Created by: Quarterless
    • Published: 17-05-2014, 21:40
    • 0 comments

    Jenvey 48mm x 118mm DCOE throttle bodies!

    Red ones. Only issue is one has a few paint scratches on the bottom. Serviced by Jenvey. As new.
    Sorry cant shrink pictures enough from my phone.
    £360 including postage to the UK.
    Go to post
Previous 1 2 3 4 template Next
There are no articles in this category.
Mark This Channel Read
 
  • Time
  • Show
Clear All
new posts
Please log in to your account to view your subscribed posts.

Categories

Collapse

article_tags

Collapse

Latest Articles

Collapse
  • Does anyone ever tried Kent HT1E camshaft
    by madmaxptt
    I am building a 2,3 pinto with twin dcoe 45s.

    I think for my setup the HT1e with Gp1 BvH is better

    what is your advice???
    27-03-2024, 11:52
  • Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.
    by Zakspak
    Break pedal box back on the bench for fitting the break light switch and setting the pedals up.
    I stripped the switch and cleaned it, then cut down the threaded section and the switch plunger.




    The pedals have been cleaned and the little surface rust removed and freshen up with a coat of gloss black
    The white line is a datum for the neutral position

    Output pipes fitted using copper sealing washers before fitting
    ...
    09-08-2023, 16:39
  • Re: xflow oil pickup problem
    by ante1970
    Ok boy. Thank's at all. Today, with help of my father in law have finished " modification with hammer" of oil pickup and make little space for conrod bolt ! Post some pics of work ! Another time thank 's HonkyWhiteTrash and Daniele....
    08-05-2023, 19:15
  • Cosworth Head
    by MO1
    Wanted
    Good usable SIERRA Cosworth 16V head complete or minus valves. But must have cam caps. Cheers
    27-04-2020, 20:23
  • Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.
    by Zakspak
    On to the centre sections. New metal on to new metal. Nice ! I welded extra plates in where the jacking point is to increase its strength, hopefully to stop it becoming dented when on stands or jacking. I over laid the new sections against the originals to check alignment, and marked them for drilling the plug weld holes. Again insides where painted with the gloss black. I marked where the originals where and removed them. Due to the replacement floor it was just a matter of un-bolting th...
    21-02-2019, 16:26
  • Fitting radiators
    by markb
    Ryou should be abel to reduce the size by editing them in paint or similar.. to post them upload them using the link at the top of the page and copy the test it gives you into a post ...
    29-05-2017, 16:30
View All
Working...