• ---

  Fitting radiators

  • Created by: markb
  • Published: 26-09-2024, 10:27
  • 0 comments

  Fitting radiators

  Ryou should be abel to reduce the size by editing them in paint or similar.. to post them upload them using the link at the top of the page and copy the test it gives you into a post ...

  Go to post

• ---

  Quaife 69G 6 speed Sequential Gearbox.

  • Created by: FoMoCo
  • Published: 26-09-2024, 10:27
  • 0 comments

  Quaife 69G 6 speed Sequential Gearbox.

  Quaife 69g gearbox for sale.
  Very little use, recent refurb.
  Long stick and new potentiometer fitted.
  
  Overs over 5k.

  Go to post

• ---

  Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.

  • Created by: Zakspak
  • Published: 26-09-2024, 10:27
  • 0 comments

  Re: 1977 Mk2 Zakspeed Escort. Rebuilding my pride and joy.

  On to the centre sections. New metal on to new metal. Nice ! I welded extra plates in where the jacking point is to increase its strength, hopefully to stop it becoming dented when on stands or jacking. I over laid the new sections against the originals to check alignment, and marked them for drilling the plug weld holes. Again insides where painted with the gloss black. I marked where the originals where and removed them. Due to the replacement floor it was just a matter of un-bolting th...

  Go to post

• ---

  RS1600 interior

  • Created by: James Jordan
  • Published: 26-09-2024, 10:27
  • 0 comments

  RS1600 interior

  I don't have full list off Items yet, but will post over weekend. If I your email address will post the pictures with a appox price Please don't make any offers until I have chance to list pictures and prices. James I have the interior of a RS1600 that is from a perfect example that was converted to a race car , seats front and rear heater consul (compete) switch's cables etc wiring loom washer bottle and foot pump oil filter/hosing servo carpets heater matrix and a bunch or other stuff all in ...

  Go to post

• ---

  Cosworth Head

  • Created by: MO1
  • Published: 26-09-2024, 10:27
  • 0 comments

  Cosworth Head

  Wanted
  Good usable SIERRA Cosworth 16V head complete or minus valves. But must have cam caps. Cheers

  Go to post

• ---

  Re: TJ Motorsport SPECIAL OFFERS

  • Created by: TJM
  • Published: 26-09-2024, 10:27
  • 0 comments

  Re: TJ Motorsport SPECIAL OFFERS

  Forgot to add the picture of the full floor:
  
  ...

  Go to post

• ---

  Does anyone ever tried Kent HT1E camshaft

  • Created by: madmaxptt
  • Published: 26-09-2024, 10:27
  • 0 comments

  Does anyone ever tried Kent HT1E camshaft

  I am building a 2,3 pinto with twin dcoe 45s.
  
  I think for my setup the HT1e with Gp1 BvH is better
  
  what is your advice???

  Go to post

• ---

  Re: NewGroup 4 Escort MK2 rolling shell

  • Created by: RZR1000
  • Published: 26-09-2024, 10:27
  • 0 comments

  Re: NewGroup 4 Escort MK2 rolling shell

  ...

  Go to post

• ---

  Head gaskets gone between 1 and 2 and worn away the block.. What are my options??

  • Created by: slatter
  • Published: 26-09-2024, 10:27
  • 0 comments

  Head gaskets gone between 1 and 2 and worn away the block.. What are my options??

  As title, found the reason my engine wasnt running right, some pics are below, what are my options?? I thought about skimming the block, but then i think the pistons will protude above the top of the block. Is there anything i can do? Or do i need a new block??
  
  
  Thanks james
  
  ...

  Go to post

  Last edited by Clint; 27-09-2024, 03:32.

• ---

  Jenvey 48mm x 118mm DCOE throttle bodies!

  • Created by: Quarterless
  • Published: 17-05-2014, 21:40
  • 0 comments

  Jenvey 48mm x 118mm DCOE throttle bodies!

  Red ones. Only issue is one has a few paint scratches on the bottom. Serviced by Jenvey. As new.
  Sorry cant shrink pictures enough from my phone.
  £360 including postage to the UK.

  Go to post