Pushrod kings MK1 Escort race car
Collapse
X
-
Re: Pushrod kings MK1 Escort race car
Just found a couple of pics of the Modsports and classic saloons races.

Last edited by Pushrod King; 10-12-2016, 22:37.Leave a comment:
-
Re: Pushrod kings MK1 Escort race car
Glad to hear it Russ, I defected to the dark side and built a Vauxhall XE in search of more power than the old engine but actually preferred racing my car with the Crossflow fitted so it will soon be going back in...... Did your son recover from his fall in the end?Leave a comment:
-
Re: Pushrod kings MK1 Escort race car
Hi Nick
My car is still going well.....Leave a comment:
-
Re: Pushrod kings MK1 Escort race car
I raced it once with the CSCC modsports and special saloons at Brands, lacking time, budget and enthusiasm to do anymore this year.Leave a comment:
-
Re: Pushrod kings MK1 Escort race car
Hello Pushrod king
Enjoyed reading your posts, noticed you haven't updated on here for sometime are you continuing racing the mk1 this year?Leave a comment:
-
-
Re: Pushrod kings MK1 Escort race car
Is that a citroen bx in that pic,Leave a comment:
-
Re: Pushrod kings MK1 Escort race car
Hi John, I don't suffer from brake problems (AP 4 pots), Jezz (Toymex) has suffered from flexing/leaking Wilwoods on his racer.Leave a comment:
-
Re: Pushrod kings MK1 Escort race car
nick have you tried to take the front indicators out and replace with ducting to front calipers? 95% of brake problems is due to over heating of pads.Leave a comment:
-
Leave a comment:
-
Re: Pushrod kings MK1 Escort race car
Also qualified 1st in class just ahead of Andy Woods Dean, what brakes have you gone for?Leave a comment:
-
Re: Pushrod kings MK1 Escort race car
You did well there Nick ,out qualified Bill !! ,hopefully there will be a white nova to battle ,my engine runs but still not sure of my proxy brakes and the hydraulic clutchLeave a comment:
-
Re: Pushrod kings MK1 Escort race car
Hopefully I'll be able to achieve a higher start position than 9th with the new engine.
Leave a comment:
-
Leave a comment: