If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Not yet, head is with a local specialist having an new valve guide and valve fitted. Should be back for the weekend and hopefully will then just be a bolt it back together job.
Will do Matt hopefully this will be the end of your teething problems,other than similar head problems ,mine used to take loads of abuse, regularly reving to over 8k with no problems,when we stripped it down we found it only had standard rod bolts still held together ,not sure how
Wanted: Second Hand Tremec TKO 500, 600 or T56 Gearbox... Cash Waiting
Any small welding, fabrication, engineering, paint or mechanical works undertaken, please PM for details.
It would seem my computer skills are not good enough !!
Hi Matt on this one we are going to try 10x13,s Andy who built my engine and is helping with the wide track has lent me his wheels and tyres to try he used to run these on his own nova and said it was very competitive
Hi Matt on this one we are going to try 10x13,s Andy who built my engine and is helping with the wide track has lent me his wheels and tyres to try he used to run these on his own nova and said it was very competitive
Wow big uns!!
Have you got any wheels and tyres left from the sport you want to sell?
Hi Matt i have got a set of comp th3,s i think ,a set of vauxhall cesaro alloys and 3 odd rl7,s all 6x15 all et49,not sure what to sell at the moment as i need to keep some to get the car on the trailer but will let you know when i decide to sell
Only a little progress Tom ,fitted the brakes and bled them re fitted the carbs but still wont run properly ,i think its the fuel pump so im going to buy a new one as it previously used to run up to pressure and cut off ,but it just keeps running now even when the car isnt running so once i have fitted a new one Andy is going to come round and adjust the carbs ,i have also got to find a new throttle cable as mine is knackered
Cheers Paul hopefully it will end up half as nice as your new Ka
Comment